hp Color LaserJet 4700常见故障代码描述,英文手册1
更新时间：2024/4/13 19:10:33,view:97hp打印机HP Color LaserJet 4700苏州hp打印机售后维修服务中心电话0512-696l6769，苏州维修点电话, hp1005打印打印完多进纸半张卡住, hp5225如何打印自检, hp1005打印测试页, HP-C4129X, HP5200高压板在哪,
Code: -
Display:
Control Panel display is blank
Description:
Possibly poor formatter, or Compact Flash Firmware card connection, or Control Panel display problem.
Remedy:
1. Reseat formatter 2. Reseat compact flash 3. Reseat memory DIMM(s) 4. Replace compact flash and firmware card 5. Replace memory DIMM 6. Replace formatter 7. Check flat ribbon cable connector from DC controller to formatter 8. Check formatter power connectors for LVPS 9. Check Control Panel display connectors to DC controller 10. Replace Control Panel display
Code: 10.00.00
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: black print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.01
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: cyan print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.02
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: magenta print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.03
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: yellow print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.90.X
Display:
10.90.X REPLACE [COLOR] CARTRIDGE
Description:
A color cartridge is out of toner and needs to be replaced
Remedy:
Replace the affected color cartridge.
Code: 10.92.00
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
black print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.01
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
cyan print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.02
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
magenta print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.03
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
yellow print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 11.X
Display:
11.X INTERNAL CLOCK ERROR
Description:
This message is displayed when there is a problem with the real-time clock on the formatter board. XX=01 Dead clock battery XX=02 Dead real-time clock
Remedy:
Replace the formatter assembly.
Code: 13.XX.YY
Display:
13.XX.YY EXTERNAL OUTPUT DEVICE PAPER JAM (4700 models)
Description:
There is a jam in the stapler/stacker.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. For more information about clearing jams,
Code: 13.XX.YY
Display:
13.XX.YY JAM IN DUPLEX PATH
Description:
There is a jam in the duplex path.
Remedy:
1. Remove the paper. 2. Run the paper path test to determine if one or more of the sensors are not working correctly. 3. Check the oblique rollers on the back side of the ETB to ensure they are not worn or dirty. 4. Upgrade formatter and DC Controller firmware. 5. Replace the ETB. 6. Check all cable connections to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN OUTPUT DEVICE
Description:
Paper is jammed in an external paper handling device. The amber light on the stacker/stapler is blinking. 13.12.01 = early reached 13.12.02 = entrance sensor not reached 13.12.03 = entrance sensor not escaped 13.12.04 = entrance sensor remaining 13.12.05 = exit sensor not reached 13.12.06 = exit sensor not escaped 13.12.07 = exit sensor remaining 13.12.08 = top cover open 13.12.09 = stapler cover open
Remedy:
Check the duplexer or the stapler/stacker for jammed paper
Code: 13.XX.YY
Display:
13.XX.YY JAM IN PAPER PATH
Description:
There is a jam in the paper path. 13.12.00 = jam in paper path 13.20.00 = jam in paper path 13.21.00 = jam in paper path
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. For more information, see Jams on page 402. 4. If paper is folding into an accordion shape, check whether the shutter on each print cartridge opens as you close the ETB and each cartridge is turning correctly. Replace defective print cartridges or drive motors. 5. Clean the attaching roller at the bottom of the ETB and make sure that the spring is holding it in place. 6. Upgrade formatter and DC Controller firmware. 7. Replace the paper pickup PCB. 8. Check all cable connections to/from the DC Controller. 9. Replace the ETB if it is not moving paper correctly. Calibrate the printer.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN STAPLER
Description:
A staple is jammed in the stapler. Check the stapler/stacker for jammed staples.
Remedy:
Remove the defective staple in the cartridge.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY 1
Description:
Paper is jammed in Tray 1.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press down to see step by step information. 4. Clean the pickup roller. If it is worn or damaged, replace it. 5. Clean or replace the separation pad. 6. Upgrade formatter and DC Controller firmware
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY X
Description:
A page is jammed in Tray 2 or in one or more of the optional trays.
Remedy:
1. Press for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. Clean the pickup roller. If it is worn or damaged, replace it. 4. Clean the feed roller. If it is worn or damaged, replace it. 5. Upgrade formatter and DC Controller firmware, which can be found in a single. 6. Check all cable connection to/from DC controller. 7. Replace the tray X paper pickup drive assembly. 8. Replace the tray X lifter motor. 9. Replace the paper feed assembly.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TOP COVER OR DUPLEX AREA
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Replace the fuser. 4. Check that the fuser paper sensor is in place. If it is defective, replace it.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE DUPLEXER
Description:
Paper is jammed in the duplexer. Check the device for jammed paper.
Remedy:
1. Remove the jammed paper. 2. Make sure the paper meets the media specifications for the duplexer. 3. Make sure the duplexer is seated correctly. 4. Make sure the sensor (SR8001) in the duplexer is operating correctly by performing a paper path test. 5. Replace the duplexer if it is not working correctly. 6. Upgrade formatter and DC Controller firmware. 7. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE FRONT COVER
Description:
There is a jam in the front cover.
Remedy:
1. Remove the jammed paper. 2. Press ? for detailed information about clearing the jam. 3. Press up and down to step through the instructions.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE TOP COVER
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Upgrade formatter and DC Controller firmware. 4. Upgrade formatter and DC Controller firmware. 5. Replace the fuser. 6. Check all cable connection to/from DC controller. 7. Check that the fuser paper sensor is in place. If it is defective, replace it. 8. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN DUPLEX PATH
Description:
There are multiple jams in the duplex path. This includes the top cover area.
Remedy:
See 13.XX.YY JAM INSIDE DUPLEXER and 13.XX.YY JAM IN DUPLEX PATH for recommended actions.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN PAPER PATH
Description:
There are multiple jams in the paper path. This includes the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions.
Code: 20
Display:
20 Insufficient Memory
Description:
The printer has received more data from the computer than fits in available memory.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. Reduce the complexity of the print job to avoid this error in the future. 3. Adding memory to the printer may allow printing of more complex pages.
Code: 22
Display:
22 EIO X BUFFER OVERFLOW
Description:
The EIO card in card slot X has overflowed its I/O buffer during a busy state.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 EMBEDDED I/O BUFFER OVERFLOW
Description:
The embedded Jetdirect print server has overflowed.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 PARALLEL I/O BUFFER OVERFLOW
Description:
The parallel buffer has overflowed during a busy state
Remedy:
1. Press to resume printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the parallel cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections or might not otherwise conform to IEEE-1284 specifications. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 22
Display:
22 USB I/O BUFFER OVERFLOW
Description:
The USB buffer has overflowed during a busy state.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the USB cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 40
Display:
40 EIO X BAD TRANSMISSION
Description:
A connection with the card in EIO slot X has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 40
Display:
40 EMBEDDED I/O BAD TRANSMISSION
Description:
A connection with the embedded Jetdirect print server has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resent the print job. 4. If the error still occurs, replace the EIO card in slot X or the formatter.
Code: 41.3
Display:
41.3 UNEXPECTED SIZE IN TRAY X
Description:
Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Code: 41.5
Display:
41.5 UNEXPECTED TYPE IN TRAY X
Description:
The printer senses a different media type in the media path than configured in the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Code: 49.XXXX
Display:
49.XXXX PRINTER ERROR
Description:
A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor-quality parallel cables, poor-connections, or home-grown programs. On rare occasions, the formatter is at fault, which is usually indicated by a 79 Service Error.
Remedy:
1. Turn the printer off then on. 2. Press Stop to clear the print job from the printer memory. 3. Turn the printer off then on. 4. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message displays only with a certain software program or print job, contact the software vendor for assistance. 5. If the message persists with different software programs and print jobs, disconnect all of the cables to the printer that connect it to the network or computer. 6. Turn the printer off. 7. Remove all memory DIMMs or thirdparty DIMMs from the printer. (Do not remove the firmware DIMM.) 8. Remove all EIO devices from the printer. 9. Turn the printer on. 10. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and on again as you install each device. 11. Replace a DIMM or EIO device if you determine that it causes the error. 12. Remember to reconnect all of the cables that connect the printer to the network or computer. 13. Upgrade formatter and DC Controller firmware. 14. If the error persists, upgrade the firmware compact flash card. 15. Replace the formatter and calibrate the printer.
Code: 50.X
Display:
50.X FUSER ERROR
Description:
A fuser error has occurred. The following are specific fuser errors: 50.1: A low fuser temperature error has occurred in the main thermistor. 50.2: A fuser warmup service error has occurred. 50.3: A high fuser temperature error has occurred in the main thermistor. 50.6: An open fuser error has occurred. 50.7: A fuser pressure release mechanism failure has occurred. 50.8: Low fuser sub-thermistor temperature 50.9: High fuser sub-thermistor temperature The error might be due to an inadequate power supply, inadequate line voltage, or a problem with the fuser.
Remedy:
1. Turn the printer off and allow it to cool down. 2. Reinstall the fuser, and check the connector (J5001) that connects the fuser and the printer. Replace the connector if it is damaged. 3. Replace the fuser. 4. Check all cable connections to/from the DC controller. 5. Replace the low-voltage power supply PCB.
Code: 51.1Y
Display:
51.1Y PRINTER ERROR
Description:
A laser error has occurred.
Y Description: 0 - Black 1 - Cyan 2 - Magenta 3 - Yellow
Remedy:
1. Turn the printer off then on. 2. Reseat the connectors (J1002 - Y, J1003 - C, J1004 - M, J1005 - K) between the laser/scanner and DC controller PCB. 3. Upgrade formatter and DC Controller firmware. 4. Replace the defective laser/scanner assembly. Calibrate the printer after replacing the laser/ scanner.
Display:
Control Panel display is blank
Description:
Possibly poor formatter, or Compact Flash Firmware card connection, or Control Panel display problem.
Remedy:
1. Reseat formatter 2. Reseat compact flash 3. Reseat memory DIMM(s) 4. Replace compact flash and firmware card 5. Replace memory DIMM 6. Replace formatter 7. Check flat ribbon cable connector from DC controller to formatter 8. Check formatter power connectors for LVPS 9. Check Control Panel display connectors to DC controller 10. Replace Control Panel display
Code: 10.00.00
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: black print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.01
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: cyan print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.02
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: magenta print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.03
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: yellow print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.90.X
Display:
10.90.X REPLACE [COLOR] CARTRIDGE
Description:
A color cartridge is out of toner and needs to be replaced
Remedy:
Replace the affected color cartridge.
Code: 10.92.00
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
black print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.01
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
cyan print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.02
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
magenta print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.03
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
yellow print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 11.X
Display:
11.X INTERNAL CLOCK ERROR
Description:
This message is displayed when there is a problem with the real-time clock on the formatter board. XX=01 Dead clock battery XX=02 Dead real-time clock
Remedy:
Replace the formatter assembly.
Code: 13.XX.YY
Display:
13.XX.YY EXTERNAL OUTPUT DEVICE PAPER JAM (4700 models)
Description:
There is a jam in the stapler/stacker.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. For more information about clearing jams,
Code: 13.XX.YY
Display:
13.XX.YY JAM IN DUPLEX PATH
Description:
There is a jam in the duplex path.
Remedy:
1. Remove the paper. 2. Run the paper path test to determine if one or more of the sensors are not working correctly. 3. Check the oblique rollers on the back side of the ETB to ensure they are not worn or dirty. 4. Upgrade formatter and DC Controller firmware. 5. Replace the ETB. 6. Check all cable connections to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN OUTPUT DEVICE
Description:
Paper is jammed in an external paper handling device. The amber light on the stacker/stapler is blinking. 13.12.01 = early reached 13.12.02 = entrance sensor not reached 13.12.03 = entrance sensor not escaped 13.12.04 = entrance sensor remaining 13.12.05 = exit sensor not reached 13.12.06 = exit sensor not escaped 13.12.07 = exit sensor remaining 13.12.08 = top cover open 13.12.09 = stapler cover open
Remedy:
Check the duplexer or the stapler/stacker for jammed paper
Code: 13.XX.YY
Display:
13.XX.YY JAM IN PAPER PATH
Description:
There is a jam in the paper path. 13.12.00 = jam in paper path 13.20.00 = jam in paper path 13.21.00 = jam in paper path
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. For more information, see Jams on page 402. 4. If paper is folding into an accordion shape, check whether the shutter on each print cartridge opens as you close the ETB and each cartridge is turning correctly. Replace defective print cartridges or drive motors. 5. Clean the attaching roller at the bottom of the ETB and make sure that the spring is holding it in place. 6. Upgrade formatter and DC Controller firmware. 7. Replace the paper pickup PCB. 8. Check all cable connections to/from the DC Controller. 9. Replace the ETB if it is not moving paper correctly. Calibrate the printer.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN STAPLER
Description:
A staple is jammed in the stapler. Check the stapler/stacker for jammed staples.
Remedy:
Remove the defective staple in the cartridge.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY 1
Description:
Paper is jammed in Tray 1.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press down to see step by step information. 4. Clean the pickup roller. If it is worn or damaged, replace it. 5. Clean or replace the separation pad. 6. Upgrade formatter and DC Controller firmware
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY X
Description:
A page is jammed in Tray 2 or in one or more of the optional trays.
Remedy:
1. Press for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. Clean the pickup roller. If it is worn or damaged, replace it. 4. Clean the feed roller. If it is worn or damaged, replace it. 5. Upgrade formatter and DC Controller firmware, which can be found in a single. 6. Check all cable connection to/from DC controller. 7. Replace the tray X paper pickup drive assembly. 8. Replace the tray X lifter motor. 9. Replace the paper feed assembly.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TOP COVER OR DUPLEX AREA
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Replace the fuser. 4. Check that the fuser paper sensor is in place. If it is defective, replace it.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE DUPLEXER
Description:
Paper is jammed in the duplexer. Check the device for jammed paper.
Remedy:
1. Remove the jammed paper. 2. Make sure the paper meets the media specifications for the duplexer. 3. Make sure the duplexer is seated correctly. 4. Make sure the sensor (SR8001) in the duplexer is operating correctly by performing a paper path test. 5. Replace the duplexer if it is not working correctly. 6. Upgrade formatter and DC Controller firmware. 7. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE FRONT COVER
Description:
There is a jam in the front cover.
Remedy:
1. Remove the jammed paper. 2. Press ? for detailed information about clearing the jam. 3. Press up and down to step through the instructions.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE TOP COVER
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Upgrade formatter and DC Controller firmware. 4. Upgrade formatter and DC Controller firmware. 5. Replace the fuser. 6. Check all cable connection to/from DC controller. 7. Check that the fuser paper sensor is in place. If it is defective, replace it. 8. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN DUPLEX PATH
Description:
There are multiple jams in the duplex path. This includes the top cover area.
Remedy:
See 13.XX.YY JAM INSIDE DUPLEXER and 13.XX.YY JAM IN DUPLEX PATH for recommended actions.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN PAPER PATH
Description:
There are multiple jams in the paper path. This includes the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions.
Code: 20
Display:
20 Insufficient Memory
Description:
The printer has received more data from the computer than fits in available memory.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. Reduce the complexity of the print job to avoid this error in the future. 3. Adding memory to the printer may allow printing of more complex pages.
Code: 22
Display:
22 EIO X BUFFER OVERFLOW
Description:
The EIO card in card slot X has overflowed its I/O buffer during a busy state.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 EMBEDDED I/O BUFFER OVERFLOW
Description:
The embedded Jetdirect print server has overflowed.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 PARALLEL I/O BUFFER OVERFLOW
Description:
The parallel buffer has overflowed during a busy state
Remedy:
1. Press to resume printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the parallel cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections or might not otherwise conform to IEEE-1284 specifications. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 22
Display:
22 USB I/O BUFFER OVERFLOW
Description:
The USB buffer has overflowed during a busy state.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the USB cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 40
Display:
40 EIO X BAD TRANSMISSION
Description:
A connection with the card in EIO slot X has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 40
Display:
40 EMBEDDED I/O BAD TRANSMISSION
Description:
A connection with the embedded Jetdirect print server has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resent the print job. 4. If the error still occurs, replace the EIO card in slot X or the formatter.
Code: 41.3
Display:
41.3 UNEXPECTED SIZE IN TRAY X
Description:
Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Code: 41.5
Display:
41.5 UNEXPECTED TYPE IN TRAY X
Description:
The printer senses a different media type in the media path than configured in the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Code: 49.XXXX
Display:
49.XXXX PRINTER ERROR
Description:
A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor-quality parallel cables, poor-connections, or home-grown programs. On rare occasions, the formatter is at fault, which is usually indicated by a 79 Service Error.
Remedy:
1. Turn the printer off then on. 2. Press Stop to clear the print job from the printer memory. 3. Turn the printer off then on. 4. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message displays only with a certain software program or print job, contact the software vendor for assistance. 5. If the message persists with different software programs and print jobs, disconnect all of the cables to the printer that connect it to the network or computer. 6. Turn the printer off. 7. Remove all memory DIMMs or thirdparty DIMMs from the printer. (Do not remove the firmware DIMM.) 8. Remove all EIO devices from the printer. 9. Turn the printer on. 10. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and on again as you install each device. 11. Replace a DIMM or EIO device if you determine that it causes the error. 12. Remember to reconnect all of the cables that connect the printer to the network or computer. 13. Upgrade formatter and DC Controller firmware. 14. If the error persists, upgrade the firmware compact flash card. 15. Replace the formatter and calibrate the printer.
Code: 50.X
Display:
50.X FUSER ERROR
Description:
A fuser error has occurred. The following are specific fuser errors: 50.1: A low fuser temperature error has occurred in the main thermistor. 50.2: A fuser warmup service error has occurred. 50.3: A high fuser temperature error has occurred in the main thermistor. 50.6: An open fuser error has occurred. 50.7: A fuser pressure release mechanism failure has occurred. 50.8: Low fuser sub-thermistor temperature 50.9: High fuser sub-thermistor temperature The error might be due to an inadequate power supply, inadequate line voltage, or a problem with the fuser.
Remedy:
1. Turn the printer off and allow it to cool down. 2. Reinstall the fuser, and check the connector (J5001) that connects the fuser and the printer. Replace the connector if it is damaged. 3. Replace the fuser. 4. Check all cable connections to/from the DC controller. 5. Replace the low-voltage power supply PCB.
Code: 51.1Y
Display:
51.1Y PRINTER ERROR
Description:
A laser error has occurred.
Y Description: 0 - Black 1 - Cyan 2 - Magenta 3 - Yellow
Remedy:
1. Turn the printer off then on. 2. Reseat the connectors (J1002 - Y, J1003 - C, J1004 - M, J1005 - K) between the laser/scanner and DC controller PCB. 3. Upgrade formatter and DC Controller firmware. 4. Replace the defective laser/scanner assembly. Calibrate the printer after replacing the laser/ scanner.
热门图文