售后电话696l6769,> 维修资料 > hp > 苏州HP DesignJet 110售后维修电话696l6769> 苏州hp打印机维修服务网

hp DesignJet 110常见故障代码描述,英文手册

Code: 01:10
Description:
Electronics Module failure.
Remedy:
Replace the Electronics Module
Code: 01:11
Description:
The Electronics Module is incorrectly positioned.
Remedy:
Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.
Code: 01:12
Description:
Electronics Module failed during the firmware upgrade OR the Electronics
Remedy:
Module failed during initialization.
Code: 02:10
Description:
Carriage failure.
Remedy:
Replace the Carriage Assembly
Code: 02:10
Description:
Carriage failure.
Remedy:
Replace the Carriage Assembly
Code: 04:13
Description:
Generic Firmware Error (Network Card).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue
Code: 08:11
Description:
Front Panel cannot be detected.
Remedy:
Reconnect the Front Panel.
Code: 11:10
Description:
Trailing Cable Failure.
Remedy:
Replace the Carriage Assembly. Replace the Electronics Module
Code: 11:11
Description:
Trailing Cable is badly connected.
Remedy:
Reconnect the Trailing Cable correctly to the Electronics Module.
If the Error Code continues, replace the Carriage Assembly
Code: 21:10
Description:
Service Station failure.
Remedy:
Replace the Service Station Assembly
Code: 22:10
Description:
Ink Supply Station failure.
Remedy:
Replace the Ink Supply Station
Code: 270:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the black printhead.
If the error code continues, replace the black printhead.
Code: 271:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the cyan printhead.
If the error code continues, replace the cyan printhead.
Code: 272:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the magenta printhead.
?If the error code continues, replace the magenta printhead.
Code: 273:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the yellow printhead.
?If the error code continues, replace the yellow printhead.
Code: 274:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the light cyan printhead.
If the error code continues, replace the light cyan printhead.
Code: 275:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the light magenta printhead.
If the error code continues, replace the magenta printhead.
Code: 35:01
Description:
No Cleanout Assembly (or Duplexer, if installed) detected while loading media.
Remedy:
Remove the Cleanout Assembly (or Duplexer, if installed) and install it again correctly. ?
Replace the Duplexer Interconnect PCA.
?If the Error Code continues, replace the Cleanout Assembly
Code: 42:10
Description:
Carriage Motor failure (short-circuit).
Remedy:
Replace the Carriage Motor Assembly
Code: 56:10
Description:
Error during the calibration of the motor encoder system or a problem finding the zero position on the Encoder Disc.
Remedy:
Replace the Paper-Axis Motor Drive Assembly Replace the Encoder Disc.
Code: 58:10
Description:
Line Sensor/Carriage Failure (during Color Calibration).
Remedy:
Replace the Carriage Assembly
Code: 61:05
Description:
Firmware Upgrade or Color Calibration was rejected because the file was sent in the wrong format.
Remedy:
Upgrade the RIP software or the Designjet System Maintenance Tool.
Code: 61:05
Description:
Firmware Upgrade or Color Calibration was rejected because the file was sent in the wrong format.
Remedy:
Upgrade the RIP software or the Designjet System Maintenance Tool.
Code: 64:04
Description:
Firmware Error (USB Port).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 65:01
Description:
Communication Failure.
Remedy:
Unplug the power cable from the printer and check the cable connections (Parellel, USB and Network cables). Plug in the power cable again and check if the Error Code has disappeared.
Code: 65:04
Description:
Generic Firmware Error (Communication Failure).
Remedy:
Upgrade the printer to the latest firmware release.
Code: 66:02:1
Description:
Horizontal clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
Remedy:
Make sure the image size is within the selected WIDTH of the sheet.
Code: 66:02:2
Description:
Vertical clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
Remedy:
Make sure the image size is within the selected LENGTH of the sheet.
Code: 71:03
Description:
Generic Firmware Error (Out of memory).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 71:14
Description:
Out-of-memory while trying to process the firmware upgrade file. Probably this is a firmware bug, because the firmware should free up enough memory to perform the firmware upgrade process correctly.
Remedy:
Perform an emergency firmware upgrade
Code: 72:04
Description:
Generic Firmware Error (expected).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 74:12
Description:
Firmware bug in the firmware upgrade process
Remedy:
Download the special file in order to update the bootlog.
Code: 79:04
Description:
Generic Firmware Error (unexpected).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 81:01
Description:
Paper-Axis shutdown - usually a paper-jam caused by a blockage of the Paper-axis System.
Remedy:
If this error code was caused by a paper-jam, unplug the power cable from the printer and clear the blockage. Plug in the power cable again and check if the Error Code has disappeared
?If this error code appeared but was NOT caused by a paper jam, replace the Paper-Axis Motor Drive Assembly
Code: 81:01
Description:
Paper-Axis shutdown - usually a paper-jam caused by a blockage of the Paper-axis System.
Remedy:
If this error code was caused by a paper-jam, unplug the power cable from the printer and clear the blockage. Plug in the power cable again and check if the Error Code has disappeared
?If this error code appeared but was NOT caused by a paper jam, replace the Paper-Axis Motor Drive Assembly
Code: 83:01:1
Description:
The paper is rejected from the Bypass due to skew.
Remedy:
When manually loading paper from the front of the paper, make sure that it is loaded straight.
Code: 83:10
Description:
Sheet feeding failure.
Remedy:
Replace the Out-Of-paper Sensor.
Replace the Electronics Module
Code: 85:10
Description:
Paper-Axis Encoder error.
Remedy:
Make sure that the Encoder Sensor cable is connected correctly.
?Replace the Paper-Axis Motor Drive Assembly.
?Replace the Electronics Module
Code: 86:01
Description:
Scan-axis shutdown - usually a paper-jam caused by a blockage of the Scan-axis System.
Remedy:
Check that there are no obstacles in the Scan-Axis which stops the Carriage from moving freely.
Too much friction in the Slider Rod, try lubricating the Slider Rod.
The Carriage is bumping into the Service Station. If the Carriage is stuck at the right hand side of the Printer and cannot be moved out to the center of the Print Platen it is because the Service Station cannot uncap the printheads. In this case replace the Service Station Assembly
Check that the belt is correctly installed and not damaged.
Check that the Turnaround Pulley is correctly installed.
Replace the Carriage Motor Assembly
Code: 86:11
Description:
Scan-axis shutdown during initialization. Typically, this error occurs when the printer detects an incorrect length.
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
Check that the Paper-Axis Drive Motor Assembly is correctly installed and that the bushing is correctly locked into position.
Check that the Carriage moves freely and DOES NOT bump into the Service Station.
If the Printheads are not installed, maybe the carriage cover is not closed completely.
If the Error Code continues, replace the Carriage Assembly

Code: 941:02:1
Description:
User selected Photo Paper and Max dpi, but the Color Calibration profile was obsolete or missing for Photo Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Paper and the selected print quality setting.
Code: 941:02:2
Description:
User selected Heavy-Weight Coated Paper and Max dpi, but the Color Calibration profile was obsolete or missing for Heavy-Weight Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Heavy-Weight Coated Paper and the selected print quality setting.
Code: 941:02:3
Description:
User selected Proofing Semi-Gloss Paper and Max dpi mode, but the Color Calibration profile was obsolete or missing for Proofing Semi-Gloss Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Proofing Semi-Gloss Paper and the selected print quality setting.
Code: 941:02:4
Description:
User selected Photo Matte Paper and Max dpi mode, but the Color Calibration profile was obsolete or missing for Photo Matte Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Matte Paper and the selected print quality setting.
Code: 941:02:5
Description:
User selected Photo Satin Paper and Max dpi mode, but the Color Calibration profile was obsolete or missing for Photo Satin Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Satin Paper and the selected print quality setting.
Code: 94:02:1
Description:
User selected Coated Paper and Best mode, but the Color Calibration profile was obsolete or missing for Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Coated Paper and the selected print quality setting.
Code: 94:02:3
Description:
User selected Photo Paper and Best mode, but the Color Calibration profile was obsolete or missing for Photo Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Paper and the selected print quality setting.
Code: 94:02:4
Description:
User selected Heavy-Weight Coated Paper and Best mode, but the Color Calibration profile was obsolete or missing for Heavy-Weight Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Heavy-Weight Coated Paper and the selected print quality setting.

Code: 94:02:5
Description:
User selected Proofing Semi-Gloss Paper and Best mode, but the Color Calibration profile was obsolete or missing for Proofing Semi-Gloss Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Proofing Semi-Gloss Paper and the selected print quality setting.
Code: 94:02:6
Description:
User selected Photo Matte Paper and Best mode, but the Color Calibration profile was obsolete or missing for Photo Matte Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Matte Paper and the selected print quality setting.
Code: 94:02:7
Description:
User selected Photo Satin Paper and Best mode, but the Color Calibration profile was obsolete or missing for Photo Satin Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Satin Paper and the selected print quality setting.
Code: 94:02:8
Description:
User selected Coated Paper and Max dpi, but the Color Calibration profile was obsolete or missing for Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Coated Paper and the selected print quality setting.
Code: 94:04
Description:
Firmware Error (during color calibration).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
?If the Error Code reappears, check for a new Firmware release.
Code: 94:08
Description:
Color Calibration Warning - Color Calibration not cancelled but Color Calibration values are likely to be incorrect.
Remedy:
Try the Color Calibration again, but this time using a differnt type of media
Code: 94:10
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and try the Color Calibration again.
?If this error code appears again, check the Color Calibration print
Code: 95:00
Description:
Printhead Alignment Failure - Printhead Alignment cancelled.
Remedy:
Clean the printhead indicated by the printer.
?If the error code continues, replace the faulty printhead.

Code: 95:02
Description:
Printhead Alignment Failure - Printhead Alignment cancelled.
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and try the Printhead Alignment again.
If this error code appears again, check the Printhead Alignment print
Code: 95:04
Description:
Firmware Error (during Printhead Alignment).
Remedy:
Upgrade the printer to the latest firmware release.

热门图文

相关资料补充


热门关注
· hp designjet 111常见故障代码描述,英文手册

· hp designjet 120常见故障代码描述,英文手册

· hp designjet 130常见故障代码描述,英文手册

· hp designjet 2000cp常见故障代码描述,英文手册

· hp designjet 2500cp常见故障代码描述,英文手册

· hp designjet 2800cp常见故障代码描述,英文手册

· hp designjet 3000cp常见故障代码描述,英文手册

· hp designjet 3500cp常见故障代码描述,英文手册

· hp designjet 3800cp常见故障代码描述,英文手册

· hp designjet 4000常见故障代码描述,英文手册2

· hp designjet 4000常见故障代码描述,英文手册1

· hp designjet 4020常见故障代码描述,英文手册2

· hp designjet 4020常见故障代码描述,英文手册1

· hp designjet 500常见故障代码描述,英文手册

· hp designjet 5000常见故障代码描述,英文手册

· hp designjet 5500常见故障代码描述,英文手册

· hp designjet 650c常见故障代码描述,英文手册

· hp designjet 700常见故障代码描述,英文手册

· hp designjet 750c常见故障代码描述,英文手册

· hp designjet 755cm常见故障代码描述,英文手册

· hp designjet 8000s常见故障代码描述,英文手册

· hp designjet 510常见故障代码描述,英文手册

· hp designjet 800常见故障代码描述,英文手册

· hp designjet 815常见故障代码描述,英文手册

· hp designjet 9000s常见故障代码描述,英文手册

· hp designjet l25500常见故障代码描述,英文手册1

· hp designjet l25500常见故障代码描述,英文手册2

· hp designjet l26500常见故障代码描述,英文手册2

· hp designjet l26500常见故障代码描述,英文手册1

· hp designjet l28500常见故障代码描述,英文手册4

推荐文章
· hp打印机不认墨盒

· hp5500绘图仪,打印机打印时出现0c00400000020c

· hp5200n打印机打印一个东西显示什么服务请求已接受

· hp5225怎么恢复出厂

· hplaserjetpro400mfp打印时显示50.2定音影器错误,是怎么回事?

· hp3015 报错50.10 怎么回事?

· hpj4580显示托架被卡住,打开打印托架检修门,清除卡塞?是哪出问题求大神指教

· hp1025 报错硒鼓错误.

· hpc7280开机老提示后面卡纸,但无纸,谁碰到过,怎么处理

· hp4525定影器和转印组件提示寿命到了,谁知道怎么清掉

· hpcp1025提示热凝器错误原因

· hp 提示59.c0错误

· hpcp1025打印一半清楚一半不清楚

· hp1215打印机显示青色碳粉盒内存错误是什么意思?

· hp3055打印机报scannererror3错误是什么问题

· hp3600齿轮组对位调整方法

· hp1108打印机上有个感叹号的灯显示红色,不打印是怎么回事?

· hp1106打印机感叹号灯一直闪,是什么故障

· hp1025彩色打印机显示有错误三角形里一个感叹号

· hp1025彩色激光打印机出现三角形灯一直亮,是什么故障

· hp5025报52.20代码错误

· hp1020打印一张时,后面跟了一张空白纸、卡纸等故障

· hp1025报错三角叹号和半圆灯同时亮问题

· hp5200l提示代码57.03错误

· hp2055d机换了定影膜之后开机自检过不去

· hp1108检测不到硒鼓,是怎么回事

· hp3050一体机,打印时总提示是50fusererror,是怎么回事

· hp2055d的维修手册

· hporder-a-cartridge按错键,打印机没反映了,有很多英文字母,不知道是怎么回事

· hp1010照片打印机打出的照片发黄,缺红色为什么?

· hp1536一体打印机总是出现在复印的时候出现(初始化)是怎么回事

· hpp1106开机后绿灯黄灯常亮,不能打印是什么故障。

· hp1106开机报警灯长亮(红灯)

· hp1106新机开机红黄灯常亮自检不了

· hp3600显示10.92.00墨盒未齿合

· hp1536复印时提示49错误,是什么原因

· hpm1216扫描到出现videoinitializeerror

· hp8600喷墨打印机一直亮ky电源灯一直闪墨水系统故障我把外置每墨盒都拿掉了

· hp2025打印几张就显示清洁怎么回事

· hp3525显示错误代码59.fo是什么意思

· hp3052机开机显示scannerbuibwarmingup扫描架不动,扫描灯常亮。

· hplaserjetm1216nfhmfp中间黄灯亮,感叹灯亮红灯

· hp9050显示57.03代码,是什么原因

· hp4350n打印机显示49.4c02错误,是什么原因

· hp2055d开机显示installblackcartridge

· hp3505提示59.co错误,什么原因

· hp5100加粉后提示installtonercartridge

· hp7610打印机要不要清零

· hpz2100开机初始化的时候报错79:04

· hp1106开机预热完两个个灯长亮