苏州维修电话696l6769,> 维修资料 > hp > 苏州hp打印机售后电话696l6769> 苏州hp打印机维修服务网

hp DesignJet 130常见故障代码描述,英文手册

Code: 01:10
Description:
Electronics Module failure.
Remedy:
Replace the Electronics Module
Code: 01:11
Description:
The Electronics Module is incorrectly positioned.
Remedy:
Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.
Code: 01:12
Description:
Electronics Module failed during the firmware upgrade OR the Electronics
Remedy:
Module failed during initialization.
Code: 02:10
Description:
Carriage failure.
Remedy:
Replace the Carriage Assembly
Code: 02:10
Description:
Carriage failure.
Remedy:
Replace the Carriage Assembly
Code: 04:13
Description:
Generic Firmware Error (Network Card).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue
Code: 08:11
Description:
Front Panel cannot be detected.
Remedy:
Reconnect the Front Panel.
Code: 11:10
Description:
Trailing Cable Failure.
Remedy:
Replace the Carriage Assembly. Replace the Electronics Module
Code: 11:11
Description:
Trailing Cable is badly connected.
Remedy:
Reconnect the Trailing Cable correctly to the Electronics Module.
If the Error Code continues, replace the Carriage Assembly
Code: 21:10
Description:
Service Station failure.
Remedy:
Replace the Service Station Assembly
Code: 22:10
Description:
Ink Supply Station failure.
Remedy:
Replace the Ink Supply Station
Code: 270:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the black printhead.
If the error code continues, replace the black printhead.
Code: 271:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the cyan printhead.
If the error code continues, replace the cyan printhead.
Code: 272:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the magenta printhead.
?If the error code continues, replace the magenta printhead.
Code: 273:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the yellow printhead.
?If the error code continues, replace the yellow printhead.
Code: 274:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the light cyan printhead.
If the error code continues, replace the light cyan printhead.
Code: 275:00
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Clean the electrical contacts on the light magenta printhead.
If the error code continues, replace the magenta printhead.
Code: 35:01
Description:
No Cleanout Assembly (or Duplexer, if installed) detected while loading media.
Remedy:
Remove the Cleanout Assembly (or Duplexer, if installed) and install it again correctly. ?
Replace the Duplexer Interconnect PCA.
?If the Error Code continues, replace the Cleanout Assembly
Code: 42:10
Description:
Carriage Motor failure (short-circuit).
Remedy:
Replace the Carriage Motor Assembly
Code: 56:10
Description:
Error during the calibration of the motor encoder system or a problem finding the zero position on the Encoder Disc.
Remedy:
Replace the Paper-Axis Motor Drive Assembly Replace the Encoder Disc.
Code: 58:10
Description:
Line Sensor/Carriage Failure (during Color Calibration).
Remedy:
Replace the Carriage Assembly
Code: 61:05
Description:
Firmware Upgrade or Color Calibration was rejected because the file was sent in the wrong format.
Remedy:
Upgrade the RIP software or the Designjet System Maintenance Tool.
Code: 61:05
Description:
Firmware Upgrade or Color Calibration was rejected because the file was sent in the wrong format.
Remedy:
Upgrade the RIP software or the Designjet System Maintenance Tool.
Code: 64:04
Description:
Firmware Error (USB Port).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 65:01
Description:
Communication Failure.
Remedy:
Unplug the power cable from the printer and check the cable connections (Parellel, USB and Network cables). Plug in the power cable again and check if the Error Code has disappeared.
Code: 65:04
Description:
Generic Firmware Error (Communication Failure).
Remedy:
Upgrade the printer to the latest firmware release.
Code: 66:02:1
Description:
Horizontal clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
Remedy:
Make sure the image size is within the selected WIDTH of the sheet.
Code: 66:02:2
Description:
Vertical clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
Remedy:
Make sure the image size is within the selected LENGTH of the sheet.
Code: 71:03
Description:
Generic Firmware Error (Out of memory).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 71:14
Description:
Out-of-memory while trying to process the firmware upgrade file. Probably this is a firmware bug, because the firmware should free up enough memory to perform the firmware upgrade process correctly.
Remedy:
Perform an emergency firmware upgrade
Code: 72:04
Description:
Generic Firmware Error (expected).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 74:12
Description:
Firmware bug in the firmware upgrade process
Remedy:
Download the special file in order to update the bootlog.
Code: 79:04
Description:
Generic Firmware Error (unexpected).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
If the Error Code reappears, check for a new Firmware release.
Code: 81:01
Description:
Paper-Axis shutdown - usually a paper-jam caused by a blockage of the Paper-axis System.
Remedy:
If this error code was caused by a paper-jam, unplug the power cable from the printer and clear the blockage. Plug in the power cable again and check if the Error Code has disappeared
?If this error code appeared but was NOT caused by a paper jam, replace the Paper-Axis Motor Drive Assembly
Code: 81:01
Description:
Paper-Axis shutdown - usually a paper-jam caused by a blockage of the Paper-axis System.
Remedy:
If this error code was caused by a paper-jam, unplug the power cable from the printer and clear the blockage. Plug in the power cable again and check if the Error Code has disappeared
?If this error code appeared but was NOT caused by a paper jam, replace the Paper-Axis Motor Drive Assembly
Code: 83:01:1
Description:
The paper is rejected from the Bypass due to skew.
Remedy:
When manually loading paper from the front of the paper, make sure that it is loaded straight.
Code: 83:10
Description:
Sheet feeding failure.
Remedy:
Replace the Out-Of-paper Sensor.
Replace the Electronics Module
Code: 85:10
Description:
Paper-Axis Encoder error.
Remedy:
Make sure that the Encoder Sensor cable is connected correctly.
?Replace the Paper-Axis Motor Drive Assembly.
?Replace the Electronics Module
Code: 86:01
Description:
Scan-axis shutdown - usually a paper-jam caused by a blockage of the Scan-axis System.
Remedy:
Check that there are no obstacles in the Scan-Axis which stops the Carriage from moving freely.
Too much friction in the Slider Rod, try lubricating the Slider Rod.
The Carriage is bumping into the Service Station. If the Carriage is stuck at the right hand side of the Printer and cannot be moved out to the center of the Print Platen it is because the Service Station cannot uncap the printheads. In this case replace the Service Station Assembly
Check that the belt is correctly installed and not damaged.
Check that the Turnaround Pulley is correctly installed.
Replace the Carriage Motor Assembly
Code: 86:11
Description:
Scan-axis shutdown during initialization. Typically, this error occurs when the printer detects an incorrect length.
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
Check that the Paper-Axis Drive Motor Assembly is correctly installed and that the bushing is correctly locked into position.
Check that the Carriage moves freely and DOES NOT bump into the Service Station.
If the Printheads are not installed, maybe the carriage cover is not closed completely.
If the Error Code continues, replace the Carriage Assembly

Code: 941:02:1
Description:
User selected Photo Paper and Max dpi, but the Color Calibration profile was obsolete or missing for Photo Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Paper and the selected print quality setting.
Code: 941:02:2
Description:
User selected Heavy-Weight Coated Paper and Max dpi, but the Color Calibration profile was obsolete or missing for Heavy-Weight Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Heavy-Weight Coated Paper and the selected print quality setting.
Code: 941:02:3
Description:
User selected Proofing Semi-Gloss Paper and Max dpi mode, but the Color Calibration profile was obsolete or missing for Proofing Semi-Gloss Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Proofing Semi-Gloss Paper and the selected print quality setting.
Code: 941:02:4
Description:
User selected Photo Matte Paper and Max dpi mode, but the Color Calibration profile was obsolete or missing for Photo Matte Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Matte Paper and the selected print quality setting.
Code: 941:02:5
Description:
User selected Photo Satin Paper and Max dpi mode, but the Color Calibration profile was obsolete or missing for Photo Satin Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Satin Paper and the selected print quality setting.
Code: 94:02:1
Description:
User selected Coated Paper and Best mode, but the Color Calibration profile was obsolete or missing for Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Coated Paper and the selected print quality setting.
Code: 94:02:3
Description:
User selected Photo Paper and Best mode, but the Color Calibration profile was obsolete or missing for Photo Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Paper and the selected print quality setting.
Code: 94:02:4
Description:
User selected Heavy-Weight Coated Paper and Best mode, but the Color Calibration profile was obsolete or missing for Heavy-Weight Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Heavy-Weight Coated Paper and the selected print quality setting.

Code: 94:02:5
Description:
User selected Proofing Semi-Gloss Paper and Best mode, but the Color Calibration profile was obsolete or missing for Proofing Semi-Gloss Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Proofing Semi-Gloss Paper and the selected print quality setting.
Code: 94:02:6
Description:
User selected Photo Matte Paper and Best mode, but the Color Calibration profile was obsolete or missing for Photo Matte Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Matte Paper and the selected print quality setting.
Code: 94:02:7
Description:
User selected Photo Satin Paper and Best mode, but the Color Calibration profile was obsolete or missing for Photo Satin Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Photo Satin Paper and the selected print quality setting.
Code: 94:02:8
Description:
User selected Coated Paper and Max dpi, but the Color Calibration profile was obsolete or missing for Coated Paper and the selected print quality setting.
Remedy:
Using the System Maintenance Tool, perform Color Calibration for Coated Paper and the selected print quality setting.
Code: 94:04
Description:
Firmware Error (during color calibration).
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
?If the Error Code reappears, check for a new Firmware release.
Code: 94:08
Description:
Color Calibration Warning - Color Calibration not cancelled but Color Calibration values are likely to be incorrect.
Remedy:
Try the Color Calibration again, but this time using a differnt type of media
Code: 94:10
Description:
Color Calibration Failure - Color Calibration cancelled.
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and try the Color Calibration again.
?If this error code appears again, check the Color Calibration print
Code: 95:00
Description:
Printhead Alignment Failure - Printhead Alignment cancelled.
Remedy:
Clean the printhead indicated by the printer.
?If the error code continues, replace the faulty printhead.

Code: 95:02
Description:
Printhead Alignment Failure - Printhead Alignment cancelled.
Remedy:
Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and try the Printhead Alignment again.
If this error code appears again, check the Printhead Alignment print
Code: 95:04
Description:
Firmware Error (during Printhead Alignment).
Remedy:
Upgrade the printer to the latest firmware release.

验证码:
昵称: 匿名
内容:
 

热门图文

相关资料补充


热门关注
· hp designjet 2000cp常见故障代码描述,英文手册

· hp designjet 2500cp常见故障代码描述,英文手册

· hp designjet 2800cp常见故障代码描述,英文手册

· hp designjet 3000cp常见故障代码描述,英文手册

· hp designjet 3500cp常见故障代码描述,英文手册

· hp designjet 3800cp常见故障代码描述,英文手册

· hp designjet 4000常见故障代码描述,英文手册2

· hp designjet 4000常见故障代码描述,英文手册1

· hp designjet 4020常见故障代码描述,英文手册2

· hp designjet 4020常见故障代码描述,英文手册1

· hp designjet 500常见故障代码描述,英文手册

· hp designjet 5000常见故障代码描述,英文手册

· hp designjet 5500常见故障代码描述,英文手册

· hp designjet 650c常见故障代码描述,英文手册

· hp designjet 700常见故障代码描述,英文手册

· hp designjet 750c常见故障代码描述,英文手册

· hp designjet 755cm常见故障代码描述,英文手册

· hp designjet 8000s常见故障代码描述,英文手册

· hp designjet 510常见故障代码描述,英文手册

· hp designjet 800常见故障代码描述,英文手册

· hp designjet 815常见故障代码描述,英文手册

· hp designjet 9000s常见故障代码描述,英文手册

· hp designjet l25500常见故障代码描述,英文手册1

· hp designjet l25500常见故障代码描述,英文手册2

· hp designjet l26500常见故障代码描述,英文手册2

· hp designjet l26500常见故障代码描述,英文手册1

· hp designjet l28500常见故障代码描述,英文手册4

· hp designjet l28500常见故障代码描述,英文手册3

· hp designjet l28500常见故障代码描述,英文手册2

· hp designjet l28500常见故障代码描述,英文手册1

推荐文章
· hp1536复印时提示49错误,是什么原因

· hp2025打印几张就显示清洁怎么回事

· hp3525显示错误代码59.fo是什么意思

· hp3052机开机显示scannerbuibwarmingup扫描架不动,扫描灯常亮。

· hplaserjetm1216nfhmfp中间黄灯亮,感叹灯亮红灯

· hp9050显示57.03代码,是什么原因

· hp4350n打印机显示49.4c02错误,是什么原因

· hp2055d开机显示installblackcartridge

· hp3505提示59.co错误,什么原因

· hp5100加粉后提示installtonercartridge

· hp7610打印机要不要清零

· hpz2100开机初始化的时候报错79:04

· hp1106开机预热完两个个灯长亮

· hp1005报50.0代码热凝器错误

· hpm1005一直提示未检测到墨盒

· hpm128打印机屏幕不显示,显示感叹号

· hplaserjetpro200colorm25ln打印时显示10.0003耗材记忆错误是怎么回事

· hpcp2025打印机搓纸轮如何转到更换位置

· hp9040故障码57.03是什问题

· hpcp1025打印机显示红色感叹号怎么消除?

· hp5225打印机出现59f0错误

· hpc5180清除卡纸每次开机显示卡纸

· hp9050打印机报错是59:10请问是什

· hpcp1525打印两张后出现cleqningmisprintpress(ok)

· hpm175a出现提示传感器错误怎么办

· hp5200lx显示downldfilenowsendrfuupgrade

· hpofficejet7110打印机进纸闪烁是怎么回事呀,请指教

· hp7000墨盒k灯闪烁是什么原因

· hp2055d打印机为什么一直会闪黄灯

· hp1025打印机显示成像鼓碳粉量不足是什么意思

· hp3015显示51.10错误怎么办

· hpm1005打印机显示printingdocument但是不打印是什么原因

· hp1336打印机感叹号亮黄灯显示e0

· hp5200高压板终于拆出来了

· hp1136激光一体机显示e1是什么意思

· hp500换喷头后出现出现系统错误22:10

· hp7110墨水系统故障0xc19a0020

· hp1010打印机为什么电源指示灯一闪一闪不打印

· hplaserjet5200lx面板上三个灯都亮不工作是怎么回事

· hp2025打2页以上(含2页)就提示jamintray2,当你按ok后出1张白纸后打第2页

· hp1005打印机的进纸通道的传感器的位置在哪

· hp7110只能识别三个墨盒第四个一装上全部都识别不了

· hp2055d打印机开机感叹号亮黄灯屏幕提示removeallpaperfrombinoutputbinisfull

· hplaserjetcp1025color打印机四个灯都在闪,提示黄色碳粉盒内存错误?

· hp1005打印机显示屏显示noprintcartridse时是怎么回事

· hp1213原稿上面下一半,提示文档进纸器拾取错误,重新装入纸张。搞了半天,没好

· hp5200n打印机提示55.04直流控制器错误

· hp50042提示系统错误22:10

· hp系统错误7904关闭电源如果问题仍存在,请致电hp支持中心。

· hp4525dn显示错误59:f0是什么问题?