Code: 01.0:10
Description:
Main PCA
Causes:
Main PCA hardware failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Replace the Main PCA Main PCA.
Code: 01.1:10
Description:
Printmech PCA
Causes:
PrintMech PCA hardware failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Replace the PrintMech PCA
Code: 01.2:10
Description:
ISS Top PCA
Causes:
ISS Top PCA communication failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Replace the Ink Supply Tubes and Trailing Cable. NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked beforehand to see if they are capable of purging the new tubes. If they are not, new Ink Cartridges must also be sent with the parts to be replaced.
Code: 01.3:10
Description:
ISS Bottom PCA
Causes:
ISS Bottom PCA communication failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Replace the Ink Supply Tubes and Trailing Cable. NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked beforehand to see if they are capable of purging the new tubes. If they are not, new Ink Cartridges must also be sent with the parts to be replaced.
Code: 02.1:10
Description:
Carriage PCA
Causes:
Carriage PCA communication failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected to the Carriage PCA, Interconnect PCA and Main PCA. • Replace the Carriage PCA
Code: 03:10
Description:
Power Supply Unit
Causes:
Power distribution failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the Power Supply Unit's blue LED is on, replace the PrintMech PCA. If not, replace the Power Supply Unit.
Code: 05.1:10
Description:
Formatter Fan
Causes:
Formatter CPU fan stopped or burnt
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the system error persists, replace the Formatter
Code: 05:10
Description:
Formatter
Causes:
Formatter communication failure with ISS
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the Formatter to PrintMech PCA cable is correctly connected. • If the system error persists, replace the Formatter

Code: 06:03
Description:
Hard Disk Drive
Causes:
Main NVM communication failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the System Error continues, replace the Hard Disk Drive
Code: 06:10
Description:
Hard Disk Drive
Causes:
Main NVM communication failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the System Error continues, replace the Hard Disk Drive
Code: 08:11
Description:
Front Panel
Causes:
Front Panel communication failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • See What to do if the front panel is blank.
Code: 11:10
Description:
Trailing Cable
Causes:
Trailing Cable does not seem to be connected
Remedy:
• Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected to the Carriage PCA, Interconnect PCA and Main PCA. • Replace the Ink Supply Tubes and Trailing Cable. NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked beforehand to see if they are capable of purging the new tubes. If they are not, new Ink Cartridges must also be sent with the parts to be replaced.
Code: 17.0:11
Description:
Other cables
Causes:
PrintMech to Interconnect Power cable does not seem to be connected
Remedy:
• Check that the PrintMech to Interconnect Power cable is not damaged. • Check that the PrintMech to Interconnect Power cable is correctly connected to the PrintMech PCA and the Interconnect PCA. • Replace the PrintMech to Interconnect Power cable (which is included in the Electronics Module Cable Kit).
Code: 17.1:11
Description:
Other cables
Causes:
PrintMech to Interconnect Data 1 cable does not seem to be connected
Remedy:
• Check that the PrintMech to Interconnect Data 1 cable is not damaged. • Check that the PrintMech to Interconnect Data 1 cable is correctly connected to the PrintMech PCA and the Interconnect PCA. • Replace the PrintMech to Interconnect Data 1 cable (which is included in the Electronics Module Cable Kit).
Code: 17.2:11
Description:
Other cables
Causes:
PrintMech to Interconnect Data 2 cable does not seem to be connected
Remedy:
• Check that the PrintMech to Interconnect Data 2 cable is not damaged. • Check that the PrintMech to Interconnect Data 2 cable is correctly connected to the PrintMech PCA and the Interconnect PCA. • Replace the PrintMech to Interconnect Data cable 2 (which is included in the Electronics Module Cable Kit).
Code: 17.3:11
Description:
Other cables
Causes:
Main PCA to PrintMech Black 1 cable does not seem to be connected
Remedy:
• Check that the Main PCA to PrintMech Black 1 cable is not damaged. • Check that the Main PCA to PrintMech Black 1 cable is correctly connected to the Main PCA and the PrintMech PCA. • Replace the Main PCA to PrintMech Black 1 cable (which is included in the Electronics Module Cable Kit).
Code: 17.4:11
Description:
Other cables
Causes:
Main PCA to PrintMech Blue 2 cable does not seem to be connected
Remedy:
• Check that the Main PCA to PrintMech Blue 2 cable is not damaged. • Check that the Main PCA to PrintMech Blue 2 cable is correctly connected to the Main PCA and the PrintMech PCA. • Replace the Main PCA to PrintMech Blue 2 cable (which is included in the Electronics Module Cable Kit).
Code: 21:03
Description:
Service Station
Causes:
Service Station electrical current limit
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Make sure that the Service Station path is clear. Remove any visible obstacles (such as foam from the printerfs packaging, screws and plastic parts) restricting the movement of the Service Station. • If the System Error continues, replace the Service Station
Code: 21:13
Description:
Service Station
Causes:
Service Station jam
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Make sure that the Service Station path is clear. Remove any visible obstacles (such as foam from the printerfs packaging, screws and plastic parts) restricting the movement of the Service Station. • If the System Error continues, replace the Service Station
Code: 23:10
Description:
Air Pressure System (APS)
Causes:
Air Pressurization System failure; unable to pressurize or depressurize tubes
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the APS cable is not damaged and is correctly connected to the PrintMech PCA. • Check that the air tubes are properly connected and are not kinked or pinched. • Replace the APS Assembly
Code: 24.1:11
Description:
Ink Supply Tubes
Causes:
ISS Top to ISS Bottom cable does not seem to be connected
Remedy:
• Check that the ISS Top to ISS Bottom cable cable is not damaged. • Check that the ISS Top to ISS Bottom cable is correctly connected to the ISS Top PCA and ISS Bottom PCA. • Replace the ISS Top to ISS Bottom cable (which is included in the Electronics Module Cable Kit).
Code: 24:03
Description:
Ink Supply Tubes
Causes:
Ink Supply Tubes purge failure
Remedy:
• Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Ensure that the dummy printheads are correctly installed and purge the Ink Supply Tubes again. • If the problem persists, replace the Setup Printhead Kit.
Code: 24:10
Description:
Ink Supply Tubes
Causes:
A broken bag has been detected in one of the Ink Cartridges
Remedy:
• Press Down Cancel to see which cartridges have a broken bag. Remove the affected cartridges, shake each one three times within 2 seconds through a distance of about 40 cm, and check whether the cartridge air tower is contaminated with ink. If at least one cartridge is contaminated, replace the Ink Supply Tubes and Trailing Cable Ink Supply Tubes and Trailing Cable. NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked beforehand to see if they are capable of purging the new tubes. If they are not, new Ink Cartridges must also be sent with the parts to be replaced. To check the Ink Cartridges, see Check ink supplies. • If no cartridge seems contaminated, follow the broken bag recovery procedure for more information
Code: 24:11
Description:
Ink Supply Tubes
Causes:
PrintMech to ISS Top cable does not seem to be connected
Remedy:
• Check that the PrintMech to ISS Top cable cable is not damaged. • Check that the PrintMech to ISS Top cable is correctly connected to the PrintMech PCA and ISS Top PCA. • Replace the PrintMech to ISS Top cable (which is included in the Electronics Module Cable Kit).

Code: 26.0:01
Description:
Ink Cartridge (color n)
Causes:
Bad contact detected in ISS slot 0 floater
Remedy:
Try the following operations on the Yellow Ink Cartridge (T7100) or the Matte Black Ink Cartridge (T7100 Monochrome). • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable
Code: 26.1:01
Description:
Ink Cartridge (color n)
Causes:
Bad contact detected in ISS slot 1 floater
Remedy:
Try the following operations on the Cyan Cartridge (T7100) or the Dark Gray Cartridge (T7100 Monochrome). • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable
Code: 26.2:01
Description:
Ink Cartridge (color n)
Causes:
Bad contact detected in ISS slot 2 floater
Remedy:
Try the following operations on the Matte Black Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable
Code: 26.3:01
Description:
Ink Cartridge (color n)
Causes:
Bad contact detected in ISS slot 3 floater
Remedy:
Try the following operations on the Dark Gray Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable
Code: 26.4:01
Description:
Ink Cartridge (color n)
Causes:
Bad contact detected in ISS slot 4 floater
Remedy:
Try the following operations on the Magenta Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable
Code: 26.5:01
Description:
Ink Cartridge (color n)
Causes:
Bad contact detected in ISS slot 5 floater
Remedy:
Try the following operations on the Gray Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable
Code: 27.1:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 1
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 27.2:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 2
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

Code: 27.3:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 3
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 27.4:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 4
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 27.5:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Matte Black Printhead (T7100) in slot 5; the T7100 Monochrome should not experience this error
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 27.6:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Matte Black Printhead (T7100) in slot 6; the T7100 Monochrome should not experience this error
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 27.7:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Gray/Dark Gray Printhead (T7100) in slot 7; the T7100 Monochrome should not experience this error
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 27.8:01
Description:
Printhead (color n)
Causes:
Calibration failed to due to poor performance of the Gray/Dark Gray Printhead (T7100) in slot 8; the T7100 Monochrome should not experience this error
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.
Code: 28.1:01
Description:
Printhead (color n)
Causes:
The Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 1 is deteriorating
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, replace that printhead with a new one. NOTE: This system error appears only after the printhead is out of warranty.
Code: 28.1:02
Description:
Printhead (color n)
Causes:
The Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 1 is nearing the end of its useful life
Remedy:
This printhead may have reached a degradation level that prevents the printer from producing acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead procedure. NOTE: This system error appears only after the printhead is out of warranty.

Code: 28.2:01
Description:
Printhead (color n)
Causes:
The Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 2 is deteriorating
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, replace that printhead with a new one. NOTE: This system error appears only after the printhead is out of warranty.
Code: 28.2:02
Description:
Printhead (color n)
Causes:
The Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 2 is nearing the end of its useful life
Remedy:
This printhead may have reached a degradation level that prevents the printer from producing acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead procedure. NOTE: This system error appears only after the printhead is out of warranty.
Code: 28.3:01
Description:
Printhead (color n)
Causes:
The Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 3 is deteriorating
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, replace that printhead with a new one. NOTE: This system error appears only after the printhead is out of warranty.
Code: 28.3:02
Description:
Printhead (color n)
Causes:
The Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 3 is nearing the end of its useful life
Remedy:
This printhead may have reached a degradation level that prevents the printer from producing acceptable prints consistently. If it becomes unacceptable in the future, run the Clean (Recover) Printhead procedure. NOTE: This system error appears only after the printhead is out of warranty.
Code: 28.4:01
Description:
Printhead (color n)
Causes:
The Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 4 is deteriorating
Remedy:
This may impact your print quality. If it becomes unacceptable in the future, replace that printhead with a new one. NOTE: This system error appears only after the printhead is out of warranty.

手机用户218.26.*.* 发表于 2022-4-29  05.1：10
 

技术 施郜 发表于 2022-5-3  硬盘的风扇问题  

热门图文

相关资料补充

HP DesignJet T7100常见故障 代码(code)描述,英文手册2 . ( ) () ( ) . , () . . . ( ) () ; ...

HP DesignJet T7100常见故障 代码(code)描述,英文手册3苏州打印机售后维修服务中心电话- . ( ) . , . - ,hpHP苏州经销商电话,苏州hp代理商电话0512-696l6769,上门服务...

HPT7100维护盒怎样清零 维护盒怎样清零维护墨盒，没有看到芯片，机器提示(RAP) 了，换上新的就可以了，纳闷如何复位的 貌似复位不了哟 墨水检测传感器(Sensor)或清零...

»HPT7100维护盒怎样清零 2024/2/29 9:10:32