苏州维修电话696l6769,> 维修资料 > hp > 苏州HP LaserJet Enterprise M606售后维修电话696l6769> 苏州hp打印机维修服务网

hp LaserJet Enterprise M606常见故障代码描述,英文手册4

更新时间:2024/3/22 6:15:41,view:62

HP LaserJet Enterprise M606打印机苏州独墅湖打印机售后服务中心电话0512-696l6769,苏州HP LaserJet Enterprise M606独墅湖维修站,HP LaserJet Enterprise M606独墅湖维修站, HP M439nda成像装置不足怎么清除, HP2130打印重复, hp m1005 scanner error 20, HP1108不断电设置, HP打印机显示阿拉伯文,

苏州hp打印机售后维修服务中心电话0512-696l6769

Code: 62.00.00
Display:
62.00.00 No system To continue turn off then on
Description:
Internal system failure
Remedy:
Turn the product off, and then on. If the error persists, reload the firmware. If the error still persists, perform a firmware upgrade. If the firmware upgrade does not resolve the problem, replace the hard disk.

Code: 65.X0.A1
Display:
65.X0.A1 Output accessory disconnected
Description:
An external paper handling accessory connection has been interrupted.
Remedy:
1. Turn the product off. 2. Make sure that all packing materials have been removed from the paper handling accessory. 3. Check the paper path for obstructions, or jammed paper. 4. Check the accessory cable connection. 5. Turn the product on. If the error persists, replace the accessory.
Code: 66.80.01
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Y-align malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.02
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Jogger malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.03
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Stapler malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.21
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Lift up malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.22
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Lift down malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.23
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Lift sensor malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.33
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Output roller malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.

Code: 66.80.35
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Self priming malfunction
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.51
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.55
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 5 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.56
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 6 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.57
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 7 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.58
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 8 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.59
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 9 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.60
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 10 (inter-page delay mismatch)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.61
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 11 (lifter task trouble)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.62
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 12 (inter-page delay mismatch)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.63
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 13 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.64
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 14 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.65
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
System error 15 (FW error)
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.70
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Page-info in flush
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.71
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Flush request in PDLV
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.72
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Delivery notice error
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.

Code: 66.80.73
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Flush request in checking paper path
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.74
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Checking paper path start in PDLV
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.75
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Flush request in flush
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 66.80.76
Display:
66.80.YY Stapler/Stacker failure
Description:
An external paper handling accessory error has occurred.
Non-flush complete
Remedy:
Turn the product off, and then on. If the error persists, replace the paper handling device.
Code: 69.11.YY
Display:
69.11.YY Error To continue turn off then on
Description:
Duplexer error
Remedy:
Turn the product off, and then on. If the error persists, replace the duplexer.
Code: 70.00.00
Display:
70.00.00 Error To continue turn off then on
Description:
DC controller failure
Remedy:
Turn the product off, and then on. If the error persists, replace the DC controller.
Code: 79.XX.YY
Display:
79.XX.YY Error To continue turn off then on
Description:
This error can be caused by corrupted print jobs, software application issues, non-product specific printer drivers, poor-quality USB or network cables, bad network connections or incorrect network configurations, invalid firmware operations, or unsupported accessories.
Remedy:
1. Turn the product off, and then on. 2. If the error persists, check the following: - The error might be caused by a network connectivity problem, such as a bad interface cable, a bad USB port, or an invalid network configuration setting. - The error might be caused by the print job, an invalid print driver, a problem with the software application, or a problem with the file you are printing. Make sure you are using the correct printer driver. Try printing using a different software application. Try printing a different file or print job. - Upgrading the product firmware might resolve the problem.
Code: 80.0X.YY
Display:
80.0X.YY Embedded JetDirect error
Description:
Embedded hp JetDirect print server critical error - 80.01.80 No heartbeat - 80.01.81 Reclaim timeout - 80.01.82 Invalid data length - 80.01.8B Invalid max outstanding packet header field - 80.01.8C Invalid channel mapping response - 80.03.01 No PGP buffers - 80.03.02 Channel table full - 80.03.03 Producer index not reset - 80.03.04 Consumer index not reset - 80.03.05 Queue position size too small - 80.03.06 Transport overflow - 80.03.07 No overflow packets - 80.03.08 Invalid identify response - 80.03.09 Invalid channel map return status - 80.03.1080.03.10 Invalid reclaim return status - 80.03.12 Datagram invalid buffer - 80.03.13 Max stream channels - 80.03.14 Max datagram channels - 80.03.15 Card reset failed - 80.03.16 Self test failure - 80.03.17 Unknown PGP packet - 80.03.18 Duplicate I/O channel
Remedy:
Turn the product off, and then on. If the error persists, replace the formatter.

Code: 81.YY.ZZ
Display:
81.YY.ZZ EIO-1 Card Failure
Description:
An EIO error has occurred. - 81.01.80 No heartbeat - 81.01.81 Reclaim timeout - 81.01.82 Invalid data length - 81.01.8B Invalid max outstanding - 81.01.8C Invalid channel mapping - 81.03.01 No PGP buffers - 81.03.02 Channel table full - 81.03.03 Producer index not reset - 81.03.04 Consumer index not reset - 81.03.05 Queue position size - 81.03.06 Transport overflow - 81.03.07 No overflow packets - 81.03.08 Invalid identify response - 81.03.09 Invalid channel map return - 81.03.10 Invalid reclaim return status - 81.03.12 Datagram invalid buffer - 81.03.13 Max stream channels - 81.03.14 Max datagram channels - 81.03.15 Card reset failed - 81.03.16 Self test failure - 81.03.17 Unknown PGP packet - 81.03.18 Duplicate I/O channelt code)
Remedy:
Turn the product off, and then on. If the error persists, replace the EIO device.
Code: 82.73.46
Display:
82.73.46
Description:
A hard disk or compact flash disk cleaning failed. Usually caused by a failure of the disk hardware.
Remedy:
1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.
Code: 82.73.47
Display:
82.73.47
Description:
A hard disk or compact flash disk cleaning failed. Usually caused by a failure of the disk hardware.
Remedy:
1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.
Code: 98.00.01
Display:
98.00.01 Corrupt data in firmware volume
Description:
Data corruption has occurred in the firmware volume
Remedy:
Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.
Code: 98.00.02
Display:
98.00.02 Corrupt data in solutions volume
Description:
Data corruption has occurred in the solutions volume
Remedy:
Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware
Code: 98.00.03
Display:
98.00.03 Corrupt data in configuration volume
Description:
Data corruption has occurred in the configuration volume
Remedy:
Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.
Code: 98.00.04
Display:
98.00.04 Corrupt data in job data volume
Description:
Data corruption has occurred in the job data volume
Remedy:
Turn the product off, and then on. Rerun the file erase function.
Code: 99.00.01
Display:
99.00.01 Upgrade not performed file is corrupt
Description:
A remote firmware upgrade (RFU) was not performed. CRC error in the firmware image (bad image).
Remedy:
Download the RFU file and attempt the upgrade again.
Code: 99.00.02
Display:
99.00.02 Upgrade not performed timeout during receive
Description:
A remote firmware upgrade (RFU) was not performed. I/O timeout when reading header number and size. Indicates a problem with the network environment, not the device.
Remedy:
The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.
Code: 99.00.03
Display:
99.00.03 Upgrade not performed error writing to disk
Description:
A remote firmware upgrade (RFU) was not performed. Disk error. May indicate a problem or a hard disk failure. It might be necessary to check the connection to the hard disk or replace the hard disk.
Remedy:
1. Download the RFU file and attempt the upgrade again. 2. If the error persists, perform the Clean Disk process. You will then need to download firmware from the Preboot menu. 3. If the error persists, replace the hard disk.
Code: 99.00.04
Display:
99.00.04 Upgrade not performed timeout during receive
Description:
A remote firmware upgrade (RFU) was not performed. I/O timeout when reading rest of header.
Remedy:
The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.
Code: 99.00.05
Display:
99.00.05 Upgrade not performed timeout during receive
Description:
A remote firmware upgrade (RFU) was not performed. I/O timeout when reading image data.
Remedy:
The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.
Code: 99.00.06
Display:
99.00.06 Upgrade not performed error reading upgrade
Description:
A remote firmware upgrade (RFU) was not performed. Unexpected read error when reading header number and size.
Remedy:
1. Download the RFU file and attempt the upgrade again. 2. If the error persists, replace the hard disk.
Code: 99.00.07
Display:
99.00.07 Upgrade not performed error reading upgrade
Description:
A remote firmware upgrade (RFU) was not performed. Unexpected read error when reading rest of header.
Remedy:
1. Download the RFU file and attempt the upgrade again. 2. If the error persists, replace the hard disk.
Code: 99.00.08
Display:
99.00.08 Upgrade not performed error reading upgrade
Description:
A remote firmware upgrade (RFU) was not performed. Unexpected read error when reading image data.
Remedy:
1. Download the RFU file and attempt the upgrade again. 2. If the error persists, replace the hard disk.
Code: 99.00.09
Display:
99.00.09 Upgrade canceled by user
Description:
A remote firmware upgrade (RFU) was not performed. The RFU was canceled by the user.
Remedy:
Resend the RFU.

Code: 99.00.10
Display:
99.00.10 Upgrade canceled by user
Description:
A remote firmware upgrade (RFU) was not performed. Job canceled when reading header number and size.
Remedy:
Resend the RFU.
Code: 99.00.11
Display:
99.00.11 Upgrade canceled by user
Description:
A remote firmware upgrade (RFU) was not performed. Job canceled when reading rest of header.
Remedy:
Resend the RFU.
Code: 99.00.12
Display:
99.00.12 Upgrade not performed the file is invalid
Description:
A remote firmware upgrade (RFU) was not performed. Header number is 1 but header size doesn’t match version 1 size.
Remedy:
Download the RFU file again. Make sure that you download the file for the correct product model. Resend the RFU.
Code: 99.00.13
Display:
99.00.13 Upgrade not performed the file is invalid
Description:
A remote firmware upgrade (RFU) was not performed. Header number is 2 but header size doesn’t match version 2 size.
Remedy:
Download the RFU file again. Make sure that you download the file for the correct product model. Resend the RFU.
Code: 99.00.14
Display:
99.00.14 Upgrade not performed the file is invalid
Description:
A remote firmware upgrade (RFU) was not performed. The file is invalid.
Remedy:
Download the RFU file again. Make sure that you download the file for the correct product model. Resend the RFU.
Code: 99.00.2X
Display:
99.00.2X
Description:
- 99.00.20 The bundle is not for this product - 99.00.21 The bundle is not signed with the correct signature, or the signature is invalid - 99.00.22 The bundle header version is not supported by this firmware - 99.00.23 The package header version is not supported by this firmware - 99.00.24 - The format of the bundle is invalid - 99.00.25 The format of the package is invalid - 99.00.26 A CRC32 check did not pass - 99.00.27 An I/O error occurred while downloading the bundlen
Remedy:
Download the correct firmware. 99.00.27 only: Turn the product off, and then on again. Resend the firware upgrade. If the error persists, try the sending the upgrade by another method (USB or Embedded Web Server).
Code: 99.09.60
Display:
99.09.60 Unsupported disk
Description:
Preboot menu error. The hard disk currently installed is not recognized or supported by the product.
Remedy:
Install the correct hard disk for this product.
Code: 99.09.61
Display:
99.09.61 Unsupported disk
Description:
Preboot menu error. The installed disk is installed in a product configured for a encrypted hard disk.
Remedy:
Access the Preboot menu and then select Lock Disk to lock the disk..

Code: 99.09.62
Display:
99.09.62 Unknown disk
Description:
Preboot menu error. The installed disk was previously locked in another product.
Remedy:
Install a new disk or use the Preboot menu to unlock this disk. If the disk is to be reused in a different product, execute the Clean Disk procedure from the Preboot menu, then reload firmware and lock the disk.
Code: 99.09.63
Display:
99.09.63 Incorrect disk
Description:
A new or blank disk has been installed in a device which previously had an encrypted disk.
Remedy:
Follow the procedure to load firmware on a new hard disk and then lock it to this product.
Code: 99.09.64
Display:
99.09.64 Disk malfunction
Description:
A fatal hard disk failure has occurred.
Remedy:
Replace the hard disk drive.
Code: 99.09.65
Display:
99.09.65 Disk data error
Description:
Disk data corruption has occurred.
Remedy:
Execute the Clean Disk procedure from the Preboot menu, and then resend the RFU.
Code: 99.09.66
Display:
99.09.66 No disk installed
Description:
A disk drive is not installed in the product.
Remedy:
Install a compatible hard disk drive.
Code: 99.09.67
Display:
99.09.67 Disk is not bootable please download firmware
Description:
The product has a non-secure disk (solid state disk) installed as the boot disk, and it has been replaced with a new service part. A new firmware image needs to be downloaded to the device.
Remedy:
1. Press any key to continue to the main Preboot menu. 2. Press the Help button to see the help text for the error. 3. Select the Administrator menu. NOTE: If there is a password assigned to the Administrator, a prompt to enter the password displays. 4. Select the Download item. 5. The user can now download a new firmware bundle to the product.
Code: 99.XX.YY
Display:
99.XX.YY
Description:
Firmware installation error
Remedy:
Reload the firmware.

热门图文

相关资料补充


热门关注
· hp laserjet enterprise m606常见故障代码描述,英文手册3

· hp laserjet enterprise m606常见故障代码描述,英文手册2

· hp laserjet enterprise m606常见故障代码描述,英文手册1

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册7

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册6

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册5

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册4

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册3

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册2

· hp laserjet enterprise flow mfp m880常见故障代码描述,英文手册1

· hp laserjet enterprise m651常见故障代码描述,英文手册7

· hp laserjet enterprise m651常见故障代码描述,英文手册6

· hp laserjet enterprise m651常见故障代码描述,英文手册5

· hp laserjet enterprise m651常见故障代码描述,英文手册4

· hp laserjet enterprise m651常见故障代码描述,英文手册3

· hp laserjet enterprise m651常见故障代码描述,英文手册2

· hp laserjet enterprise m651常见故障代码描述,英文手册1

· hp laserjet enterprise m680常见故障代码描述,英文手册7

· hp laserjet enterprise m680常见故障代码描述,英文手册6

· hp laserjet enterprise m680常见故障代码描述,英文手册5

· hp laserjet enterprise m680常见故障代码描述,英文手册4

· hp laserjet enterprise m680常见故障代码描述,英文手册3

· hp laserjet enterprise m680常见故障代码描述,英文手册2

· hp laserjet enterprise m680常见故障代码描述,英文手册1

· hp laserjet enterprise m806常见故障代码描述,英文手册7

· hp laserjet enterprise m806常见故障代码描述,英文手册6

· hp laserjet enterprise m806常见故障代码描述,英文手册5

· hp laserjet enterprise m806常见故障代码描述,英文手册4

· hp laserjet enterprise m806常见故障代码描述,英文手册3

· hp laserjet enterprise m806常见故障代码描述,英文手册2

推荐文章
· hp435nw101000耗材记忆错误按ok继续

· hpm226dn打印机,记忆错误清零

· hp5500开机自检80%时提示systemereror0f0100030c09a4switchoff/onifproblempersistscontacthpsupport

· hp1005开机显示hewlell-packarderror:b0603

· hp7110打印机黄色感叹号跳,无法正常打印

· hplaserjetcp1025nwcolor为什么指示灯一直在闪,打印提示脱机

· hp打印机p1106打印时显示热凝器错误怎么办

· hp226dn一体机如何清零

· hp5200 报49.1b03代码 主板

· hpm1005开机无反应,如何判别是电源板还是主板的问题实拍图示说明.jpg

· hp2025颜色平面定位传感器错误

· hplaserjet9050dn错误代码49.2f83error

· hp2520hc电源灯闪并亮喊叹号

· hpm128fn加完粉后一直报黑色碳粉不足

· hpm202dw更换硒鼓出现不兼容的墨粉盒

· hpcp1025无法识别芯片

· hp128老提示更换硒鼓

· hp175a开机显示正在初始化后就显示通道卡纸

· hp1606dn提醒指示灯、就绪指示灯和“确定”指示灯亮起

· hpmfp175报49错误

· hplaserjetp1106就绪灯和错误灯同时亮

· hpn126打印机总是自动初始化

· hpm128fn双灯闪烁无显示

· hpm1136打印机激光器扫描架清理

· hpm1136mfp显示hp,然后下面两个灯一直在双闪,无法打印,什么情况

· hp5025错误代码59.20

· hp定影器错误关闭后然后打开

· hpm2727一直初始化

· hpcp5225恢复出厂设置

· hp177fw一体机新机提示安装成像鼓

· 佳能mf4452报警:e2020002接触式传感器hp错误,回路故障

· hp2055扫描打印复印一体机,显示printingdocument然后无反映故障

· hp1005纸刚出定影组件就卡住

· hp2055d开机提示52扫描仪错误

· hp128提示文档进纸器拾取错误

· hpm128fp故障灯一直闪控制面板无显示

· hp126nw提示正在使用用过的碳粉盒

· hpt790绘图仪错误代码79:03

· 79errorhp2600

· hp176开机时为什么电源灯旁的感叹号闪烁

· hpm1213nf打印一张通路卡纸

· hp1055cmip地址查询

· hp-mfpm176n加了粉还提示墨粉量低

· hp3630墨盒加墨水图解

· hp3035错误信息49.ff04

· hplaserjet1100serues显示感叹号

· hpm176一直提示三角感叹号错误是怎么回事

· hp1112开机灯闪烁

· hp系统错误7904关闭电源如果问题仍存在,请致电hp支持

· hpp2055d提示49err3d910c8怎么解决