HP LaserJet Pro 400 M451常见故障代码描述,英文手册1

Code: -
Display:
Black cartridge low
Description:
The print cartridge is nearing the end of its useful life.
Remedy:
Printing can continue, but consider having a replacement supply on hand.
Code: -
Display:
Black in wrong position
Description:
The print cartridge is installed in the incorrect slot.
Remedy:
Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow.
Code: -
Display:
Black very low
Description:
The print cartridge is at the end of its useful life. A customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, or never." This option is provided as a customer convenience and is not an indication these pages will have acceptable print quality.
Remedy:
To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.
Code: -
Display:
Cleaning . . .
Description:
The product periodically performs a cleaning procedure to maintain the best print quality.
Remedy:
Wait for the cleaning process to finish.
Code: -
Display:
Cyan cartridge low
Description:
The print cartridge is nearing the end of its useful life.
Remedy:
Printing can continue, but consider having a replacement supply on hand.
Code: -
Display:
Cyan in wrong position
Description:
The print cartridge is installed in the incorrect slot.
Remedy:
Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow.
Code: -
Display:
Cyan very low
Description:
The print cartridge is at the end of its useful life. A customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, or never." This option is provided as a customer convenience and is not an indication these pages will have acceptable print quality.
Remedy:
To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.
Code: -
Display:
Device error Press [OK]
Description:
An internal error occurred.
Remedy:
Press the OK button to resume the job.

Code: -
Display:
Front door open
Description:
The product front door is open.
Remedy:
Close the door.
Code: -
Display:
Genuine HP supply installed
Description:
A genuine HP supply was installed.
Remedy:
No action necessary
Code: -
Display:
Incompatible
Description:
You have installed a print cartridge that is intended for use in a different HP product model. The product might not function correctly with this print cartridge installed.
Remedy:
Install the correct print cartridge for this product.
Code: -
Display:
Incorrect supplies
Description:
More than one print cartridge is installed in the incorrect slot.
Remedy:
Be sure that each print cartridge is in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, yellow.
Code: -
Display:
Install cartridge
Description:
The print cartridge is either not installed or not correctly installed in the product.
Remedy:
Install the print cartridge.
Code: -
Display:
Invalid driver Press [OK]
Description:
You are using an incorrect printer driver.
Remedy:
Select the correct printer driver.
Code: -
Display:
Jam in
Description:
The product has detected a jam.
Remedy:
Clear the jam from the location indicated. The job should continue to print. If it does not, try reprinting the job.
Code: -
Display:
Jam in tray # Clear jam and then Press [OK]
Description:
The product has detected a jam.
Remedy:
Clear the jam from the location indicated, and then press OK.

Code: -
Display:
Load tray #
Description:
A tray is configured for the paper type and size that the print job is requesting, but that tray is empty.
Remedy:
Load the correct paper into the tray, or press the OK button to use paper in a different tray.
Code: -
Display:
Load tray 1 plain Cleaning Mode [OK] to start
Description:
The product is ready to process the cleaning operation.
Remedy:
Load Tray 1 with plain paper in the size indicated, and then press the OK button.
Code: -
Display:
Load tray Press [OK] for available media
Description:
The tray is empty.
Remedy:
Load paper into the tray to continue printing. Press the OK button to select a different tray.
Code: -
Display:
Load tray 1
Description:
No trays are configured for the paper type and size that the print job is requesting.
Remedy:
Load the correct paper into Tray 1, or press OK to use paper in a different tray.
Code: -
Display:
Magenta cartridge low
Description:
The print cartridge is nearing the end of its useful life.
Remedy:
Printing can continue, but consider having a replacement supply on hand.
Code: -
Display:
Magenta in wrong position
Description:
The print cartridge is installed in the incorrect slot.
Remedy:
Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow.
Code: -
Display:
Magenta very low
Description:
The print cartridge is at the end of its useful life. A customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, or never." This option is provided as a customer convenience and is not an indication these pages will have acceptable print quality.
Remedy:
To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.
Code: -
Display:
Manual duplex Load tray Press [OK]
Description:
The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.
Remedy:
Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you and then press the OK button.


Code: -
Display:
Manual feed Press [OK] for available media
Description:
The product is set for manual feed mode.
Remedy:
Press the OK button to clear the message or load the correct paper into Tray 1.
Code: -
Display:
Memory is low Press [OK]
Description:
The product memory is almost full.
Remedy:
Press the OK button to finish the job, or press the Cancel button to cancel the job. Break the job into smaller jobs that contain fewer pages.
Code: -
Display:
Misprint Press [OK]
Description:
Paper has been delayed as it moves through the product.
Remedy:
Press the OK button to clear the message. To avoid this problem, try the following solutions: 1. Adjust the paper guides in the tray. Make sure the front paper guide is pushing the paper against the back edge of the tray. 2. Use paper that meets HP specifications. Store paper unopened in its original packaging. 3. Use the product in an area that meets the environmental specifications for this product.
Code: -
Display:
Print failure, press OK. If error repeats, turn off then on.
Description:
The product cannot process the page.
Remedy:
Press the OK button to continue printing the job, but output might be affected. If the error persists, turn the power off and then on. Resend the print job.
Code: -
Display:
Rear door open
Description:
The product rear door is open.
Remedy:
Close the door.
Code: -
Display:
Remove shipping lock from cartridge
Description:
A print cartridge shipping lock is installed.
Remedy:
Pull the orange tab to remove the shipping lock from the cartridge.
Code: -
Display:
Remove shipping locks from cartridges
Description:
A print cartridge shipping lock is installed on one or more print cartridges.
Remedy:
Pull the orange tab to remove the shipping lock from the cartridge.
Code: -
Display:
Replace
Description:
The print cartridge is at the end of its useful like, and the product is customer-configured to stop printing when it reaches the very low state.
Remedy:
To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.


Code: -
Display:
Supplies low
Description:
More than one supply item is low.
Remedy:
Check the supply level gauges on the control panel, or print a supplies status page to determine which print cartridges are low. Printing will continue until a Very Low message displays. Consider having replacement supplies on hand
Code: -
Display:
Unexpected size in tray # Load Press [OK]
Description:
The product has detected paper in the tray that does not match the configuration for the tray.
Remedy:
Load the correct paper into the tray, or configure the tray for the size that you have loaded.
Code: -
Display:
Unsupported Press [OK] to continue
Description:
The product has detected a print cartridge that was not made by HP.
Remedy:
Press the OK button to continue printing.
Code: -
Display:
Used in use
Description:
You are using a print cartridge that reached the default low threshold while it was installed in a product.
Remedy:
Prining can continue, but consider having a replacement supply on hand.
Code: -
Display:
Used installed Press [OK] to continue
Description:
You have installed a print cartridge that reached the default low threshold while it was installed in another product.
Remedy:
Press the OK button to continue.
Code: -
Display:
Used supplies in use
Description:
You are using more than one print cartridge that reached the default low threshold while it was installed in a product.
Remedy:
Printing can continue, but consider having replacement supplies on hand.
Code: -
Display:
Yellow cartridge low
Description:
The print cartridge is nearing the end of its useful life.
Remedy:
Printing can continue, but consider having a replacement supply on hand.
Code: -
Display:
Yellow in wrong position
Description:
The print cartridge is installed in the incorrect slot.
Remedy:
Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow.

Code: -
Display:
Yellow very low
Description:
The print cartridge is at the end of its useful life. A customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, or never." This option is provided as a customer convenience and is not an indication these pages will have acceptable print quality.
Remedy:
To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.
Code: 10.0000
Display:
10.XXXX Supply memory error
Description:
The memory tag (e-label) on one of the print cartridges or the imaging drum is damaged or missing.
Black cartridge e-label error
Remedy:
1. Replace the supply item. 2. Verify that connector J124 on the engine controller is firmly seated. 3. Replace the engine controller.
Code: 10.0000
Display:
Description:
Black e-label error
Remedy:



      

热门图文

相关资料补充

苏州hp维修站电话696l6769,hp打印机配件批发,苏州售后服务中心电话,苏州售后电话,苏州hp打印机专卖店,苏州hp耗材批发渠道,硒鼓,墨盒,苏州hp打印机租赁,企业打包服务,技术服务,故障排除,苏州园区维修,苏州新区维修,苏州吴中区维修,苏州相成区维修,苏州吴江区维修,苏州姑苏区维修

热门关注
· hp laserjet pro cm1410 mfp常见故障代码描述,英文手册

· hp laserjet pro cm1415 mfp常见故障代码描述,英文手册

· hp laserjet pro 300 m375 mfp常见故障代码描述,英文手册

· hp laserjet pro 400 m401常见故障代码描述,英文手册

· hp laserjet pro 400 m475 mfp常见故障代码描述,英文手册

· hp laserjet pro 400 mfp m425常见故障代码描述,英文手册

· hp laserjet pro 500 color mfp m570常见故障代码描述,英文手册

· hp laserjet pro color mfp m476常见故障代码描述,英文手册

· hp laserjet pro cp1520常见故障代码描述,英文手册

· hp laserjet pro cp1525常见故障代码描述,英文手册

· hp laserjet pro m435nw常见故障代码描述,英文手册

· hp laserjet pro m201常见故障代码描述,英文手册

· hp laserjet pro m402常见故障代码描述,英文手册

· hp laserjet pro m403常见故障代码描述,英文手册

· hp laserjet pro m521常见故障代码描述,英文手册

· hp laserjet pro m521dn常见故障代码描述,英文手册

· hp laserjet pro m521dw常见故障代码描述,英文手册

· hp laserjet pro m701常见故障代码描述,英文手册

· hp laserjet pro m706常见故障代码描述,英文手册

· hp laserjet pro mfp m125a常见故障代码描述,英文手册

· hp laserjet pro mfp m125nw常见故障代码描述,英文手册

· hp laserjet pro mfp m125r常见故障代码描述,英文手册

· hp laserjet pro mfp m125ra常见故障代码描述,英文手册

· hp laserjet pro mfp m126nw常见故障代码描述,英文手册

· hp laserjet pro mfp m127fn常见故障代码描述,英文手册

· hp laserjet pro mfp m127fw常见故障代码描述,英文手册

· hp laserjet pro mfp m128fn常见故障代码描述,英文手册

· hp laserjet pro mfp m128fp常见故障代码描述,英文手册

· hp laserjet pro mfp m128fw常见故障代码描述,英文手册

· hp laserjet pro mfp m225常见故障代码描述,英文手册

推荐文章
· hplaserjet9050dn错误代码49.2f83error

· hp2520hc电源灯闪并亮喊叹号

· hpm128fn加完粉后一直报黑色碳粉不足

· hpm202dw更换硒鼓出现不兼容的墨粉盒

· hpcp1025无法识别芯片

· hp128老提示更换硒鼓

· hp175a开机显示正在初始化后就显示通道卡纸

· hp1606dn提醒指示灯、就绪指示灯和“确定”指示灯亮起

· hpmfp175报49错误

· hplaserjetp1106就绪灯和错误灯同时亮

· hpn126打印机总是自动初始化

· hpm128fn双灯闪烁无显示

· hpm1136打印机激光器扫描架清理

· hpm1136mfp显示hp,然后下面两个灯一直在双闪,无法打印,什么情况

· hp5025错误代码59.20

· hp定影器错误关闭后然后打开

· hpm2727一直初始化

· hpcp5225恢复出厂设置

· hp177fw一体机新机提示安装成像鼓

· 佳能mf4452报警:e2020002接触式传感器hp错误,回路故障

· hp2055扫描打印复印一体机,显示printingdocument然后无反映故障

· hp1005纸刚出定影组件就卡住

· hp2055d开机提示52扫描仪错误

· hp128提示文档进纸器拾取错误

· hpm128fp故障灯一直闪控制面板无显示

· hp126nw提示正在使用用过的碳粉盒

· hpt790绘图仪错误代码79:03

· 79errorhp2600

· hp176开机时为什么电源灯旁的感叹号闪烁

· hpm1213nf打印一张通路卡纸

· hp1055cmip地址查询

· hp-mfpm176n加了粉还提示墨粉量低

· hp3630墨盒加墨水图解

· hp3035错误信息49.ff04

· hplaserjet1100serues显示感叹号

· hpm176一直提示三角感叹号错误是怎么回事

· hp1112开机灯闪烁

· hp系统错误7904关闭电源如果问题仍存在,请致电hp支持中心

· hpp2055d提示49err3d910c8怎么解决

· hpm1005复印薄的文稿有黑影

· hp226dw提示扫描仪错误17关闭然后打开

· hp1280电源灯不亮的真正原因

· hpp1606n不进纸,是什么问题

· hp2025彩色打印机报错59是哪里的问题

· ricohprintersc680

· hpm128fp开机一直显示正在初始化

· hp1319f屏幕 无显

· hp m1005一体机安装程序错误,rpc服务器不可用

· hp m1005 开机报scanner error 20错误,故障原因

· hp1020/hp1020plus/hp1010/hp1007定影器故障夹纸原因