苏州hp打印机维修服务网 > 维修资料 > hp > 苏州HP LaserJet Pro CP1520售后维修电话696l6769 > 正文

hp LaserJet Pro CP1520常见故障代码描述,英文手册

Code: 10.XXXX
Display:
10.XXXX Supply error
Description:
The e-label for one of the print cartridges cannot be read or is missing.
• 10.0000 = black e-label error • 10.0001 = cyan e-label error • 10.0002 = magenta e-label error • 10.0003 = yellow e-label error • 10.1000 = black e-label is missing • 10.1001 = cyan e-label is missing • 10.1002 = magenta e-label is missing • 10.1003 = yellow e-label is missing
Remedy:
Reinstall the print cartridge. Turn the product off and then on. If the problem is not solved, replace the print cartridge.
Code: 49
Display:
49 Error
Description:
The product experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
Code: 50.10
Display:
50.10 Fuser error
Description:
Fuser is defective (abnormal high temperature of the thermistor)
Remedy:
1. Reconnect the connectors of the fuser unit (J802) and DC controller PCA (J104). 2. Measure the resistance between the connector J802-1 and J802-3 on the fuser. If the resistance is not within the range from approximately 220 kOhm to 660 k (at ambient temperatures), replace the fuser. 3. Replace the fuser power supply unit.
Code: 50.12
Display:
50.12 Fuser error
Description:
Fuser is defective (Fuser 1 pressure release mechanism failure)
Remedy:
1. Reconnect the connectors of the DC controller PCA (J110, J115). 2. Check the sensor flag of the fuser pressure release sensor. If the sensor flag is damaged, replace it. 3. Replace the fuser motor. 4. Replace the high-voltage power supply unit. 5. Replace the fuser unit.
Code: 50.2
Display:
50.2 Fuser error
Description:
Fuser is defective (warm-up failure)
Remedy:
1. Reconnect the connectors of the fuser unit (J802) and DC controller PCA (J104). 2. Measure the resistance between the connector J801-1 and J801-3 on the fusier. If the resistance is not within the range from approximately 220 kOm to 660 kOm (at ambient temperatures), replace the fuser. 3. Reconnect the connectors of the fuser power supply unit (J201, J202, J203). 4. Measure the resistance between the connector J801-1 and J801-2 on the fuser. If the resistance is not within the range from approximately 21 0hm to 25 Ohm (at ambient temperatures), replace the fuser. 5. If the message persists, replace the fuser power supply unit.
Code: 50.3
Display:
50.3 Fuser error
Description:
Fuser is defective (abnormally low temperature of the thermistor)
Remedy:
1. Reconnect the connectors of the fuser (J802) and DC controller PCA (J104). 2. Measure the resistance between the connector J802-1 and J802-3 on the fuser. If the resistance is not within the range from approximately 220 kO to 660 kO (at ambient temperatures), replace the fuser. 3. Reconnect the connectors of the fuser power supply unit (J201, J202, J203). 4. Measure the resistance between the connector J801-1 and J801-2 on the fuser. If the resistance is not within the range from approximately 21 O to 25 O (at ambient temperatures), replace the fuser. 5. Replace the fuser. 6. Replace the fuser power supply unit.
Code: 50.6
Display:
50.6 Fuser error
Description:
Fuser is defective (drive circuit failure)
Remedy:
1. Reconnect the connectors of the fuser power supply unit (J201, J202, J203) and DC controller PCA (J105). 2. Check the power source. If the power generator is used, improve the situation. NOTE: If the product does not meet the power requirement of 40 to 70Hz frequency, the fuser temperature control does not work properly and this causes malfunction. 3. Replace the fuser power supply unit.
Code: 51.XX
Display:
51.XX Error
Description:
Optical unit is defective.
Remedy:
Reconnect the connectors of the laser driver PCA (J501) and the DC controller PCA (J108, J109). If the problem is not solved, replace the product.

Code: 54.XX
Display:
54.XX Error
Description:
The product has experienced a density sensor error.
Remedy:
at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
Code: 55.X
Display:
55.X Error
Description:
The product has experienced a DC controller memory error.
Remedy:
Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
Code: 57
Display:
57 Fan error
Description:
The product has experienced a problem with its internal fan.
Remedy:
Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
Code: 59.20
Display:
59.X Error
Description:
The product has experienced a problem with one of the motors.
Main motor is defective (start-up failure)
Remedy:
Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If the problem is not solved, follow these steps. 1. Reconnect the connectors of the main motor (J701) and DC controller PCA (J121). 2. If the problem persists, replace the main motor.
Code: 59.30
Display:
59.X Error
Description:
The product has experienced a problem with one of the motors.
Main motor is defective (rotational failure)
Remedy:
Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If the problem is not solved, follow these steps. 1. Reconnect the connectors of the main motor (J701) and DC controller PCA (J121). 2. If the problem persists, replace the main motor.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
Code: 79
Display:
79 Service error
Description:
An incompatible DIMM is installed.
Remedy:
1. Turn the product power off. 2. Install a DIMM that the product supports. 3. Turn the product on.

热门图文

相关资料补充


热门关注
· hp laserjet pro cp1525常见故障代码描述,英文手册

· hp laserjet pro m435nw常见故障代码描述,英文手册

· hp laserjet pro m201常见故障代码描述,英文手册

· hp laserjet pro m402常见故障代码描述,英文手册

· hp laserjet pro m403常见故障代码描述,英文手册

· hp laserjet pro m521常见故障代码描述,英文手册

· hp laserjet pro m521dn常见故障代码描述,英文手册

· hp laserjet pro m521dw常见故障代码描述,英文手册

· hp laserjet pro m701常见故障代码描述,英文手册

· hp laserjet pro m706常见故障代码描述,英文手册

· hp laserjet pro mfp m125a常见故障代码描述,英文手册

· hp laserjet pro mfp m125nw常见故障代码描述,英文手册

· hp laserjet pro mfp m125r常见故障代码描述,英文手册

· hp laserjet pro mfp m125ra常见故障代码描述,英文手册

· hp laserjet pro mfp m126nw常见故障代码描述,英文手册

· hp laserjet pro mfp m127fn常见故障代码描述,英文手册

· hp laserjet pro mfp m127fw常见故障代码描述,英文手册

· hp laserjet pro mfp m128fn常见故障代码描述,英文手册

· hp laserjet pro mfp m128fp常见故障代码描述,英文手册

· hp laserjet pro mfp m128fw常见故障代码描述,英文手册

· hp laserjet pro mfp m225常见故障代码描述,英文手册

· hp laserjet pro mfp m226常见故障代码描述,英文手册

· hp laserjet pro mfp m426常见故障代码描述,英文手册2

· hp laserjet pro mfp m426常见故障代码描述,英文手册1

· hp laserjet pro mfp m427常见故障代码描述,英文手册2

· hp laserjet pro mfp m427常见故障代码描述,英文手册1

· hp latex 3000常见故障代码描述,英文手册8

· hp latex 3000常见故障代码描述,英文手册7

· hp latex 3000常见故障代码描述,英文手册6

· hp latex 3000常见故障代码描述,英文手册5

推荐文章
· hp1336打印机感叹号亮黄灯显示e0

· hp5200高压板终于拆出来了

· hp1136激光一体机显示e1是什么意思

· hp500换喷头后出现出现系统错误22:10

· hp7110墨水系统故障0xc19a0020

· hp1010打印机为什么电源指示灯一闪一闪不打印

· hplaserjet5200lx面板上三个灯都亮不工作是怎么回事

· hp2025打2页以上(含2页)就提示jamintray2,当你按ok后出1张白纸后打第2页

· hp1005打印机的进纸通道的传感器的位置在哪

· hp7110只能识别三个墨盒第四个一装上全部都识别不了

· hp2055d打印机开机感叹号亮黄灯屏幕提示removeallpaperfrombinoutputbinisfull

· hplaserjetcp1025color打印机四个灯都在闪,提示黄色碳粉盒内存错误?

· hp1005打印机显示屏显示noprintcartridse时是怎么回事

· hp1213原稿上面下一半,提示文档进纸器拾取错误,重新装入纸张。搞了半天,没好

· hp5200n打印机提示55.04直流控制器错误

· hp50042提示系统错误22:10

· hp系统错误7904关闭电源如果问题仍存在,请致电hp支持中心。

· hp4525dn显示错误59:f0是什么问题?

· hpcp1525n打印红色重影校准也不好使

· hp1566打印机第一打印很快以后变慢

· hp1106显示感叹号灯亮

· hp400打印机提示50.2定影器错误,请关闭打开?

· hp435nw101000耗材记忆错误按ok继续

· hpm226dn打印机,记忆错误清零

· hp5500开机自检80%时提示systemereror0f0100030c09a4switchoff/onifproblempersistscontacthpsupport

· hp1005开机显示hewlell-packarderror:b0603

· hp7110打印机黄色感叹号跳,无法正常打印

· hplaserjetcp1025nwcolor为什么指示灯一直在闪,打印提示脱机

· hp打印机p1106打印时显示热凝器错误怎么办

· hp226dn一体机如何清零

· hp5200 报49.1b03代码 主板

· hpm1005开机无反应,如何判别是电源板还是主板的问题实拍图示说明.jpg

· hp2025颜色平面定位传感器错误

· hplaserjet9050dn错误代码49.2f83error

· hp2520hc电源灯闪并亮喊叹号

· hpm128fn加完粉后一直报黑色碳粉不足

· hpm202dw更换硒鼓出现不兼容的墨粉盒

· hpcp1025无法识别芯片

· hp128老提示更换硒鼓

· hp175a开机显示正在初始化后就显示通道卡纸

· hp1606dn提醒指示灯、就绪指示灯和“确定”指示灯亮起

· hpmfp175报49错误

· hplaserjetp1106就绪灯和错误灯同时亮

· hpn126打印机总是自动初始化

· hpm128fn双灯闪烁无显示

· hpm1136打印机激光器扫描架清理

· hpm1136mfp显示hp,然后下面两个灯一直在双闪,无法打印,什么情况

· hp5025错误代码59.20

· hp定影器错误关闭后然后打开

· hpm2727一直初始化