苏州sharp打印机维修服务网 > 维修资料 > sharp > 苏州sharpSharp MXM753N售后维修电话696l6769 > 正文

Sharp MXM753N常见故障代码描述,英文手册1

更新时间:2024/3/24 20:59:49,view:189

Sharp MXM753N打印机苏州横塘一体机维修服务中心电话0512-696l6769,苏州Sharp MXM753N横塘维修站,Sharp MXM753N横塘维修站, SharpAR-208DPCL6打印不了, 苏州sharp扫描仪维修, sharpar2348扫描时报错, 苏州sharp扫描仪维修, 苏州sharp扫描仪维修,

Code: A0-01
Description:
PCU PWB ROM error
Causes:
The firmware version-up is not completed properly by interruption of the power during the version-up
operation, etc. ROM trouble.
Remedy:
Use SIM49-1 to perform the version-up procedure again. Replace the ROM.
Code: A0-02
Description:
SCU PWB ROM error
Causes:
The firmware version-up is not completed properly by interruption of the power during the version-up
operation, etc. ROM trouble.
Remedy:
Use SIM49-1 to perform the version-up procedure again. Replace the ROM.
Code: A0-04
Description:
ACU PWB ROM error (when scanner expansion kit is installed)
Causes:
The firmware update is failed because of turning OFF the power during the firmware update operation, etc. ROM trouble.
Remedy:
Use SIM49-1 to execute update of the firmware. Replace the ROM.
Code: A0-10
Description:
MFP PWB ROM error
Causes:
Firmware combination error between the MFP and the image ROM (color correction ROM).
Remedy:
Upgrade the firmware versions of the MFP and the image ROM (color correction ROM).
Code: A0-11
Description:
Firmware version inconsistency (MFP - PCU)
Causes:
Firmware combination error between the MFP and the PCU.
Remedy:
Check the combination between the MFP and the PCU.
Code: A0-12
Description:
Firmware version inconsistency (MFP - SCU)
Causes:
Firmware combination error between the MFP and the SCU.
Remedy:
Check the combination between the MFP and the SCU.
Code: A0-15
Description:
DSK BOOT version disagreement
Causes:
Firmware combination error between the DSK and the BOOT.
Remedy:
Check the combination between the DSK and the BOOT.
Code: A0-20
Description:
Conflict firmware and EEPROM data version (MFP)
Causes:
Inconsistency between the MFP firmware version and the EEPROM data version.
Remedy:
Check the combination of the firmware.

Code: A0-21
Description:
Conflict firmware and EEPROM data version (PCU)
Causes:
Inconsistency between the PCU firmware version and the EEPROM data version.
Remedy:
Check the combination of the firmware.
Code: A0-22
Description:
Conflict firmware and EEPROM data version (SCU)
Causes:
Inconsistency between the SCU firmware version and the EEPROM data version.
Remedy:
Check the combination of the firmware.
Code: C1-10
Description:
Main charger trouble
Causes:
The main charger unit is not installed properly. There is an abnormality in the main charger unit. Disconnection of the high voltage PWB connector. MC/DV high voltage PWB trouble. PCU PWB trouble
Remedy:
Check the output of the main charger with SIM8-2. Check disconnection of the main charger./Replace. Check disconnection of the high voltage PWB connector./Replace. Replace the MC/DV high voltage PWB. Replace the PCU PWB.
Code: E6-10
Description:
DSPF shading error (Black correction)
Causes:
Installation error of the CCD unit harness. CCD unit trouble. DSPF PWB trouble.
Remedy:
Check the installing state of the harness to the CCD unit. Check the CCD unit. Check the DSPF PWB.
Code: E6-11
Description:
DSPF shading error (White correction)
Causes:
Installation error of the CCD unit harness. Copy lamp lighting trouble. Dirt on the reference white plate. CCD unit trouble. DSPF PWB trouble. Shading adjustment error
Remedy:
Check the installing state of the harness the CCD unit. Clean the reference white plate. Check the CCD unit. Check the DSPF PWB.
Code: E6-14
Description:
CCD-ASIC error
Causes:
DSPF PWB trouble
Remedy:
Replace the DSPF PWB.
Code: E7-01
Description:
MFP image data error
Causes:
Image data transfer error in the MFP PWB. MFP PWB trouble.
Remedy:
Check connection of the connector and the harness of the MFP PWB. Replace the MFP PWB.
Code: E7-03
Description:
HDD trouble
Causes:
Connector, harness connection trouble in the MFP PWB and HDD. HDD error file management area data abnormality (FAT breakage). MFP PWB trouble.
Remedy:
Check connection of the connector and the harness of the MFP PWB and HDD. Use SIM62-2,3 to check read/write operations of the HDD. Replace the HDD. Replace the MFP PWB.
Code: E7-04
Description:
HDD-ASIC error
Causes:
HDD-ASIC trouble. An error occurs in the HDD-ASIC self test when booting.
Remedy:
Replace the MFP PWB.
Code: E7-05
Description:
Standard/Extension memory R/W error (MFP PWB) (Local memory)
Causes:
Improper insertion of the memory. Garbled memory data. The memory capacity is not the specified level.
Remedy:
Check insertion of the memory. Use SIM60-1 to check the read/write operations of the memory. Replace the expansion memory. Replace the MFP PWB.
Code: E7-06
Description:
Image data decode error
Causes:
Compressed image data abnormality. HDD connection trouble when HDD is installed. Image data compression/transfer data garble. MFP PWB trouble.
Remedy:
If the job at an occurrence of an error is a FAX job, check the FAX PWB. Check connection of the MFPC PWB and the HDD. Replace the MFPC PWB.
Code: E7-08
Description:
MFP memory compatibility error (MFP PWB) (Local memory)
Causes:
A DIMM of different specifications is installed to the MFP memory slot. DIMM trouble.
Remedy:
Check the installed DIMM. Replace the DIMM.
Code: E7-09
Description:
Standard/Extension memory size (MFP PWB) (Local memory)
Causes:
A DIMM which is not 512MB is inserted. DIMM trouble. Insufficient memory size
Remedy:
Replace the DIMM.
Code: E7-10
Description:
Shading error (Black correction)
Causes:
Abnormality in the CCD black scan level when the scanner lamp is turned OFF. Improper installation of the harness to the CCD unit. CCD unit abnormality. SCU PWB abnormality.
Remedy:
Check connection of the harness to the CCD unit. Check the CCD unit. Check the SCU PWB.
Code: E7-11
Description:
Shading error (White correction)
Causes:
Abnormality in the CCD white reference plate scan level when the scanner lamp is turned ON. Improper installation of the harness to the CCD unit. Dirt on the mirror, lens, and the reference white plate. Scanner lamp lighting trouble. CCD unit abnormality. SCU PWB abnormality.
Remedy:
Check connection of the harness to the CCD unit. Check connection of the harness to the scanner lamp unit. Clean the mirror, the lens, and the reference white plate. Check the CCD unit. Check the SCU PWB.
Code: E7-14
Description:
CCD-ASIC error
Causes:
SCU PWB trouble.
Remedy:
Check the SCU PWB. Replace the SCU PWB.
Code: E7-20
Description:
LSU laser detection error
Causes:
Optical axis shift. Reduced laser power, lighting error, laser diode trouble. Harness and connector trouble between the LD/BD PWB and the LSU control PWB.
Remedy:
Use SIM61-1 to check the operation of the LSU. Check the PWB and connection of the harness in the LSU. Replace the LSU.
Code: E7-21
Description:
LSU laser deterioration trouble
Causes:
Power reduction due to laser deterioration. Harness and connector disconnection/insertion trouble between the LD PWB and the LSU control PWB.
Remedy:
Use SIM61-1 to check the operation of the LSU. Check the PWB and connection of the harness in the LSU. Replace the LSU.
Code: E7-28
Description:
LSU-PCU connection error
Causes:
Communication error between the CPU in the PCU PWB and the LSU control ASIC. Improper connection of the communication connector between the PCU PWB and the LSU control PWB (interface PWB). Harness trouble between the PCU PWB and the LSU control PWB (interface PWB) PCU PWB or LSU control PWB (interface PWB) trouble
Remedy:
Check connection of the connector and the harness between the PCU PWB and the LSU control PWB (interface PWB). Replace the LSU control PWB. Replace the PCU PWB.
Code: E7-29
Description:
LSU ASIC frequency error
Causes:
Oscillation abnormality of the external oscillator and the internal oscillating circuit used in the LSU ASIC. LSU ASIC abnormality on the LSU ASIC PWB.
Remedy:
Replace the LSU control PWB.
Code: E7-42
Description:
Data error (ACRE ASIC)
Causes:
Image transfer trouble.
Remedy:
Check the connection state of the ACRE ASIC PWB connector. Replace the ACRE ASIC PWB.
Code: E7-46
Description:
Decode error (ACRE ASIC)
Causes:
Compression data abnormality. Garbled data are produced in image compression/ transmission. ACRE ASIC PWB trouble.
Remedy:
Check the installation state of the PWB. Check connection of the ACRE ASIC PWB. Replace the ACRE ASIC PWB.
Code: E7-48
Description:
Memory error (ACRE ASIC)
Causes:
DIMM trouble, memory slot trouble. DIMM insertion trouble, different DIMM inserted.
Remedy:
DIMM trouble. Replace the PWB.
Code: E7-49
Description:
Water Mark data error
Causes:
Watermark data trouble
Remedy:
Use SIM49-5 to upload the watermark data. Replace the HDD.
Code: E7-50
Description:
Engine connection trouble
Causes:
A PWB, or firmware, or LSU which is not supported by the machine specifications is detected in the PCU PWB. PCU PWB trouble. LSU trouble.
Remedy:
Check the kind and the version of the firmware. Check the LSU, and replace it if necessary. Check the PCU PWB, and replace it if necessary.
Code: E7-55
Description:
PWB information sum error (Engine detection)
PCU EEPROM PWB information sum error
Causes:
PCU EEPROM sum check error. PCU EEPROM trouble. PCU EEPROM contact trouble. Malfunction due to noises
Remedy:
Replace the PCU PWB. Replace the PCU EEPROM.
Code: E7-60
Description:
Combination error between the MFP PWB and other PWB, firmware
Causes:
A PWB or firmware which is not supported by the machine specifications is detected in the MFP PWB. MFP PWB trouble. The PWB/firmware which is not supported by the machine specifications is connected.
Remedy:
Check the kind and the version of the firmware. Check the MFP PWB, and replace it if necessary.
Code: E7-61
Description:
Combination error between the MFP PWB and the PCU PWB
Causes:
Combination error between the MFP PWB and the PCU PWB. MFP PWB trouble. PCU PWB trouble.
Remedy:
Check the combination between the MFP PWB and the PCU PWB. Replace the MFP PWB. Replace the PCU PWB.
Code: E7-62
Description:
Combination error between the MFP PWB and the SCU PWB
Causes:
Combination error between the MFP PWB and the SCU PWB. MFP PWB trouble. SCU PWB trouble.
Remedy:
Check the combination between the MFP PWB and the SCU PWB. Replace the MFP PWB. Replace the SCU PWB.
Code: E7-65
Description:
MFP EEPROM sum check error
Causes:
MFP PWB EEPROM device breakdown. Contact trouble of the MFP EEPROM device. Malfunction due to noises.
Remedy:
Replace the MFP PWB. Replace the MFP PWB EEPROM.
Code: E7-70
Description:
Combination error between the SCU PWB and the other PWB
Causes:
A SUC PWB /firmware which does not comply with the machine specifications is detected.
SCU PWB trouble. A PWB/firmware which does not comply with the machine specifications is connected.
Remedy:
Check the firmware kind/version. Check and replace the SCU PWB.
Code: E7-75
Description:
SCU EEPROM sum check error
Causes:
SCU PWB EEPROM device breakdown. Contact trouble of the SCU EEPROM device. Malfunction due to noises.
Remedy:
Replace the SCU PWB. Replace the SCU PWB EEPROM.
Code: E7-80
Description:
MFP-SCU PWB communication error
Causes:
SCU PWB connector connection trouble. SCU PWB - MFP PWB connection trouble. SCU PWB mother board connection trouble. SCU PWB trouble. MFP PWB trouble. Mother board trouble.
Remedy:
Check connection of the SCU PWB, the MFP PWB, and the mother board. Check the ground. Replace the SCU PWB. Replace the MFP PWB. Replace the mother board.
Code: E7-90
Description:
MFP - PCU PWB communication error
Causes:
PCU PWB connector connection trouble. PCU PWB - MFP PWB connection trouble. PCU PWB trouble.
MFP PWB trouble. Mother board trouble.
Remedy:
Check connection of the PCU PWB, the MFP PWB, and the mother board. Check the ground. Replace the PCU PWB. Replace the MFP PWB. Replace the mother board.
Code: EE-EC
Description:
Automatic toner density adjustment error (Sampling level 26-102/114-200)
The sampling level in the automatic toner density adjustment is outside of 108
Causes:
Toner density sensor trouble. Developing unit trouble. PCU PWB trouble.
Remedy:
Replace the toner density sensor. Replace the developing unit. Replace the PCU PWB.
Code: EE-EL
Description:
Automatic toner density adjustment error (Over toner)
The sampling level in the automatic toner density adjustment is less than 26 or the control voltage is over 197.
Causes:
Toner density sensor trouble. Charging voltage/ developing voltage trouble, toner density trouble, or developing unit trouble. PCU PWB trouble.
Remedy:
Replace the toner density sensor. Replace the developing unit. Replace the PCU PWB.
Code: EE-EU
Description:
Automatic toner density adjustment error (Under toner)
The sampling level in the automatic toner density adjustment is over 200 or the control voltage is less than 49.
Causes:
Toner density sensor trouble. Charging voltage/ developing voltage trouble, toner density trouble, or developing unit trouble. PCU PWB trouble.
Remedy:
Replace the toner density sensor. Replace the developing unit. Replace the PCU PWB.
Code: F1-00
Description:
Finisher - PCU PWB communication error
Causes:
Connection trouble of the connector and the harness between the finisher and the PCU PWB. Finisher control PWB trouble. PCU PWB trouble. Strong external noises.
Remedy:
Check the connector and the harness between the finisher and the PCU PWB. Replace the finisher control PWB. Replace the PCU PWB.
Code: F1-02
Description:
Finisher paper transport motor trouble
Causes:
Finisher paper transport motor trouble. Harness and connector connection trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper transport motor. Replace the paper transport motor. Check connection of the connector and the harness. Replace the finisher control PWB.
Code: F1-03
Description:
Finisher paper exit roller lifting operation trouble
Causes:
Finisher paper exit roller lift motor trouble. Harness and connector connection trouble. Home position sensor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper exit roller lift motor. Replace the paper exit roller lift motor. Check connection of the connector and the harness. Replace the home position sensor. Replace the finisher control PWB.

Code: F1-08
Description:
Stapler shift trouble
Causes:
Stapler shift motor trouble. Finisher control PWB trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the stapler shift motor. Replace the stapler shift motor. Check connection of the connector and the harness. Replace the home position sensor. Replace the finisher control PWB.
Code: F1-09
Description:
Finisher load quantity sensor trouble
Causes:
Punch paper edge sensor trouble. Harness disconnection. Finisher control PWB trouble. Punch control PWB trouble.
Remedy:
Use SIM3-2 to check the operation of the sensor. Replace the punch paper edge sensor. Replace the finisher control PWB. Replace the punch control PWB.
Code: F1-10
Description:
Staple operation trouble
Causes:
Staple motor trouble. Finisher control PWB trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the staple motor. Replace the staple motor. Check connection of the connector and the harness. Replace the home position sensor. Replace the finisher control PWB.
Code: F1-11
Description:
Finisher grip operation trouble
Causes:
Gripper arm motor trouble. Finisher control PWB trouble. Grip arm trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the gripper arm motor. Replace the gripper arm motor (FGAM). Replace the finisher control PWB. Replace the grip arm. Replace the home position sensor.
Code: F1-14
Description:
Finisher paper tail push down motor trouble
Causes:
Paper tail push down motor trouble. Finisher control PWB trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the paper tail push down motor. Replace the paper tail push down motor (FPTPDM). Replace the finisher control PWB. Replace the home position sensor.
Code: F1-15
Description:
Finisher paper exit tray lift operation trouble
Lift motor trouble.
Causes:
Paper exit tray lift motor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper exit tray lift motor. Replace the finisher control PWB. Replace the paper exit tray lift motor (FTLM).
Code: F1-18
Description:
Finisher paper tail holding motor trouble
Causes:
Finisher paper tail holding motor trouble. Home position sensor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper tail holding motor. Replace the paper tail holding motor (FPTHM). Replace the home position sensor. Replace the finisher control PWB.
Code: F1-19
Description:
Finisher alignment operation trouble F
Causes:
Finisher paper alignment motor lock. Motor speed abnormality. Over-current to the motor. Home position sensor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper alignment motor. Replace the paper alignment motor (FPAM-F). Replace the home position sensor. Replace the finisher control PWB.
Code: F1-20
Description:
Finisher alignment operation trouble R
Causes:
Finisher paper alignment motor lock. Motor speed abnormality. Over-current to the motor. Home position sensor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper alignment motor. Replace the paper alignment motor (FPAM-F). Replace the home position sensor. Replace the finisher control PWB.
Code: F1-21
Description:
Finisher paper delivery unit cooling fan trouble
Causes:
Finisher paper delivery unit cooling fan motor trouble. Finisher control PWB trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the paper delivery unit cooling fan motor. Replace the paper delivery unit cooling fan motor (PDCF). Replace the finisher control PWB. Check connection of the connector and the harness.
Code: F1-23
Description:
Finisher shutter trouble
Causes:
Motor lock trouble. Control PWB trouble. Home position sensor trouble. Connection harness/connector connection trouble.
Remedy:
Check the operation of the rear edge assist motor with SIM3-3. Check connection from the control PWB to the motor. Replace the control PWB. Replace the sensor.
Code: F1-25
Description:
Finisher paper transport roller lift motor trouble
Causes:
Finisher paper transport roller lift motor lock trouble. Home position sensor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper transport roller lift motor. Replace the paper transport roller lift motor (FPTRLM). Replace the home position sensor. Replace the finisher control PWB.
Code: F1-28
Description:
Finisher paper alignment roller lift motor trouble
Causes:
Finisher paper alignment roller lift motor lock trouble. Home position sensor trouble. Finisher control PWB trouble.
Remedy:
Use SIM3-3 to check the operation of the paper alignment roller lift motor. Replace the paper alignment roller lift motor (FARLM). Replace the home position sensor. Replace the finisher control PWB.
Code: F1-30
Description:
Finisher - Saddle unit communication trouble
Causes:
Connector and harness connection trouble. Finisher control PWB trouble.
Remedy:
Check connection of the connector and the harness. Turn OFF/ON the power. Replace the finisher control PWB.
Code: F1-31
Description:
Saddle paper folding trouble
Causes:
Saddle paper transport motor trouble. Saddle paper folding mechanism trouble. Finisher control PWB trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle paper folding. Replace the saddle paper transport motor (FSPTM). Check and repair the saddle paper folding mechanism. Replace the finisher control PWB Replace the home position sensor.
Code: F1-33
Description:
Punch unit shift operation trouble
Causes:
Punch shift motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Check the punch operation. Replace the punch motor. Replace the finisher control PWB. Replace the home position sensor. Check connection of the connectors and the harness.
Code: F1-34
Description:
Punch operation trouble
Causes:
Punch motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Replace the finisher control PWB. Readjust the finisher. (Use SIM3-10,Finisher control PWB DIP SW adjustment.)
Code: F1-37
Description:
Finisher data backup RAM error
Causes:
Finisher control PWB trouble. Malfunction due to noises
Remedy:
Replace the punch control PWB. Set the punch unit specifications, and adjust the sensor. (Punch unit control PWB DIP SW adjustment.)
Code: F1-38
Description:
Punch data backup RAM error
Causes:
Punch control PWB trouble. Malfunction due to noises
Remedy:
Use SIM3-3 to check the operation of the saddle positioning motor. Replace the saddle positioning motor (FSPM). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-41
Description:
Saddle paper positioning operation trouble
Abnormality in the folding positioning guide motor in the saddle section.
Causes:
Saddle positioning motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle roller guide motor. Replace the saddle roller guide motor (FSRGM). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-42
Description:
Saddle guide motor trouble
Causes:
Saddle roller guide motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle alignment motor. Replace the saddle alignment motor (FSPAM). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-43
Description:
Saddle alignment operation trouble
Causes:
Saddle alignment motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle staple motor R. Replace the saddle staple motor R (FSDSMR). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-44
Description:
Saddle staple motor R trouble
Causes:
Saddle staple motor R trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle staple motor F. Replace the saddle staple motor F (FSDSMF). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-45
Description:
Saddle staple motor F trouble
Abnormality of the staple unit drive motor in the saddle section.
Causes:
Saddle staple motor F trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle motor. Replace the saddle motor (FSDM). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-46
Description:
Saddle motor trouble
Causes:
Saddle motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the saddle motor. Replace the saddle motor (FSDM). Replace the finisher control PWB. Replace the home position sensor. Check connection of the harness and the connector.
Code: F1-50
Description:
Main unit - Finisher combination error
Causes:
The finisher which is not supported by the main unit model is installed. Finisher control PWB trouble.
Remedy:
Install a proper finisher. Replace the finisher control PWB.
Code: F1-51
Description:
Saddle sensor connection trouble
Causes:
Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-2 to check the operation of the guide home position sensor and the saddle plate position sensor. Replace the finisher control PWB. Check connection of the harness and the connector.
Code: F1-52
Description:
Finisher micro switch trouble
Causes:
Finisher control PWB trouble. Each micro switch trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-2 to check the operation of the safety switch 1 and the delivery roller lift down sensor. Replace the finisher control PWB. Check connection of the harness and the connector.
Code: F1-60
Description:
Finisher - Inserter communication trouble
Causes:
Connector and harness connection trouble. Finisher control PWB trouble.
Remedy:
Check connection of the connector and the harness. Turn OFF/ON the power. Replace the finisher control PWB.
Code: F1-61
Description:
Inserter EEPROM trouble
Causes:
EEPROM trouble. Inserter PWB EEPROM access circuit trouble.
Remedy:
Check the installing state of the EEPROM. Replace the inserter control PWB.
Code: F1-62
Description:
Inserter reverse sensor trouble
Causes:
Sensor breakage. Harness disconnection. Inserter PWB trouble.
Remedy:
Use SIM3-2 to check the operation of the sensor. Replace the inserter control PWB.
Code: F1-80
Description:
Finisher power cooling fan motor trouble
Causes:
Power cooling fan motor trouble. Finisher control PWB trouble. Harness and connector connection trouble.
Remedy:
Replace the power cooling fan motor. Replace the finisher control PWB. Check connection of the harness and the connector.
Code: F1-81
Description:
Finisher paper delivery unit paper transport motor trouble
Causes:
Paper delivery unit paper transport motor trouble. Finisher control PWB trouble. Harness and connector connection trouble.
Remedy:
Use SIM3-3 to check the operation of the paper delivery unit paper transport motor. Replace the paper delivery unit paper transport motor (PDPTM). Replace the finisher control PWB. Check connection of the harness and the connector.
Code: F1-83
Description:
Finisher paper guide motor trouble
Causes:
Paper guide motor trouble. Finisher control PWB trouble. Harness and connector connection trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the paper guide motor. Replace the paper guide motor (FPGM). Replace the finisher control PWB. Check connection of the harness and the connector. Replace the home position sensor.
Code: F1-84
Description:
Finisher grip trouble
Causes:
Gripper motor trouble. Finisher control PWB trouble. Harness and connector connection trouble. Home position sensor trouble
Remedy:
Use SIM3-3 to check the operation of the gripper motor. Replace the gripper motor (FGM). Replace the finisher control PWB. Check connection of the harness and the connector. Replace the home position sensor.
Code: F1-86
Description:
Finisher delivery paper holding motor trouble
Causes:
Delivery paper holding motor trouble. Finisher control PWB trouble. Harness and connector connection trouble. Home position sensor trouble.
Remedy:
Use SIM3-3 to check the operation of the delivery paper holding motor. Replace the delivery paper holding motor (FDPHM). Replace the finisher control PWB. Check connection of the harness and the connector. Replace the home position sensor.
Code: F2-31
Description:
Image density sensor trouble (OPC drum surface reflection ratio abnormality)
Causes:
Before execution of the process control, a document is scanned by the image density sensor and the sensor gain is adjusted so that the output is at a fixed level. Though, however, the sensor gain is changed, the output does not become a fixed level. Image density sensor trouble Connection trouble of the harness between the PCU PWB and the image density sensor Image density sensor dirt
Remedy:
Use SIM44-2 to execute the gain adjustment of the process control sensor. When there are some troubles, "Error" is displayed. Check the sensor and the harness at that time.
Code: F2-39
Description:
Process thermistor trouble
Causes:
Process thermistor trouble. Process thermistor harness connection trouble. PCU PWB trouble
Remedy:
Replace the process thermistor. Check connection of the harness and the connector. Replace the PCU PWB.
Code: F2-40
Description:
Toner density sensor trouble
Causes:
Toner density sensor output abnormality (Sample level less than 26, or over 200) Connection trouble of the connector and the harness. Developing unit trouble. PCU PWB trouble.
Remedy:
Replace the toner density sensor. Check connection of the connectors and the harness. Replace the developing unit. Replace the PCU PWB.
Code: F2-46
Description:
Developing thermistor trouble
Causes:
Developing thermistor harness connection trouble. Developing thermistor harness trouble. PCU PWB trouble.
Remedy:
Check connection of the harness and connector of the developing thermistor. Replace the developing thermistor harness. Replace the PCU PWB.
Code: F2-47
Description:
Room temperature thermistor trouble
Causes:
Room temperature thermistor trouble. Room temperature thermistor harness trouble. PCU PWB trouble.
Remedy:
Check connection of the harness and connector of the room temperature thermistor. Replace the room temperature thermistor harness. Replace the PCU PWB.
Code: F2-48
Description:
Developing humidity sensor trouble
Causes:
Developing humidity sensor harness connection trouble. Developing humidity sensor trouble. PCU PWB trouble.
Remedy:
Check connection of the harness and connector of the developing humidity sensor. Replace the developing humidity sensor. Replace the PCU PWB.
Code: F2-59
Description:
Room humidity sensor trouble
Causes:
Room humidity sensor harness connection trouble. Room humidity sensor trouble. PCU PWB trouble.
Remedy:
Check connection of the harness and connector of the room humidity sensor. Replace the room humidity sensor. Replace the PCU PWB.
Code: F2-64
Description:
Toner supply operation trouble
Causes:
Toner density sensor trouble. Connector/harness trouble. PCU PWB trouble. Toner cartridge trouble. Developing unit trouble.
Remedy:
Replace the toner density sensor. Connector and harness check. Replace the PCU PWB. Replace the toner cartridge. Replace the developing unit.
Code: F2-68
Description:
Waste toner full sensor trouble
Causes:
Waste toner full sensor trouble Connector/harness trouble. Waste toner pipe clogging
Remedy:
Replace the waste toner full sensor. Connector/harness trouble. Remove clogging in the waste toner pipe.

热门图文

相关资料补充

SHARPMX-M753N出现错误代码F2-68怎么处理-出现错误代码-怎么处理 ...

Sharp MXM753N常见故障代码描述,英文手册1 - - -, . . - - . . - - -, . . - - . . - ( ) ...

»Sharp MXM753N常见故障代码描述,英文手册1


热门关注
· sharp mxm754fn&24120;&35265;&25925;&38556;&20195;&30721;&25551;&36848;,&33521;&25991;&25163;&20876;03

· sharp mxm754fn常见故障代码描述,英文手册02

· sharp mxm754fn&24120;&35265;&25925;&38556;&20195;&30721;&25551;&36848;,&33521;&25991;&25163;&20876;01

· sharp mxm753u&24120;&35265;&25925;&38556;&20195;&30721;&25551;&36848;,&33521;&25991;&25163;&20876;02

· sharp mxm753u常见故障代码描述,英文手册01

· sharp mxm754n&24120;&35265;&25925;&38556;&20195;&30721;&25551;&36848;,&33521;&25991;&25163;&20876;03

· sharp mxm754n常见故障代码描述,英文手册02

· sharp mxm754n&24120;&35265;&25925;&38556;&20195;&30721;&25551;&36848;,&33521;&25991;&25163;&20876;01

· sharp mxm850常见故障代码描述,英文手册

· sharp mxm904常见故障代码描述,英文手册

· sharp mxm905常见故障代码描述,英文手册

· sharp mxm950常见故障代码描述,英文手册

· sharp sf7200常见故障代码描述,英文手册

· sharp sf7800常见故障代码描述,英文手册

· sharp sf7850常见故障代码描述,英文手册

· sharp sf7900常见故障代码描述,英文手册

· sharp sf8200常见故障代码描述,英文手册

· sharp z30常见故障代码描述,英文手册

· sharp sf8100常见故障代码描述,英文手册

· sharp z50常见故障代码描述,英文手册

· sharp z55常见故障代码描述,英文手册

· sharp z60常见故障代码描述,英文手册

· sharp z70常见故障代码描述,英文手册

· sharp z800常见错误代码及故障详细描述英文手册

· sharp z810常见错误代码及故障详细描述英文手册01

· toshibastudio2303a换碳粉

· sharp1808s扫描出现u-2

· sharp ar2008d打印清楚。复印很淡,手动清楚,调整方法

· toshiba2303a复印机出现e140代码是什么意思

· sharp-mx2018uc 报l14-04代码,那位大师指点一下

推荐文章
· sharp4018打印机小三角灯一直闪问题

· sharpar-4821d打印机出现了那个三角的红色一直亮着怎么回事

· sharpmx-m2608n无法网络打印,设置方法

· toshiba2830显示c970故障代码

· sharpmx-m850打印机出错代码:f2-00怎清除

· sharp2608复印机错误代码l4-11是什么意思怎么解决

· sharp打印机型号是:ar1808s,最近经常出现2f现象,请问是什状况呀?

· sharp2608复印机怎么清除f2-40代码

· toshiba打印机3040c请求维修ce40什么意思

· toshiba复印机错误代码2e66什么意思

· sharpdx-2008uc错误代码f2-40是什么意思

· sharpm2608n无法连接设备请查看设备是否处于扫描模式

· 施乐扫描错误异常结束(018-543)sharednameerrorinserver

· sharpar2348n显示错误

· sharpar2348n常见问题报错解决方法带图文

· sharpar2048s问题大全

· shngc-1202-00下载

· sharp1808s扫描仪显示u-2

· sharp2048n呼叫维修

· sharp2348n恢复出厂

· sharp打印机出现错误代码h5-1是设么意思

· sharp打印复印一体机上面显示有个人的形状然后红灯了是什么意思

· 东芝(toshiba)a4多功能一体机e-studio300d加粉流程图

· sharp2618nc发生错误。代码:l4-43

· sharpar2048打印机显示需要用户干预打印不成怎么办

· toshiba2303卡纸怎去除

· 东芝toshiba2303a打印机提示简易设置调整错误请按确定键重试

· sharp-mx2018uc 报l14-04代码,那位大师指点一下

· toshiba2303a复印机出现e140代码是什么意思

· sharp ar2008d打印清楚。复印很淡,手动清楚,调整方法

· sharp1808s扫描出现u-2

· toshibastudio2303a换碳粉

· sharp z810常见错误代码及故障详细描述英文手册01

· sharp z800常见错误代码及故障详细描述英文手册

· sharp z70常见故障代码描述,英文手册

· sharp z60常见故障代码描述,英文手册

· sharp z55常见故障代码描述,英文手册

· sharp z50常见故障代码描述,英文手册

· sharp sf8100常见故障代码描述,英文手册

· sharp z30常见故障代码描述,英文手册

· sharp sf8200常见故障代码描述,英文手册

· sharp sf7900常见故障代码描述,英文手册

· sharp sf7850常见故障代码描述,英文手册

· sharp sf7800常见故障代码描述,英文手册

· sharp sf7200常见故障代码描述,英文手册

· sharp mxm950常见故障代码描述,英文手册

· sharp mxm905常见故障代码描述,英文手册

· sharp mxm904常见故障代码描述,英文手册

· sharp mxm850常见故障代码描述,英文手册

· sharp mxm754n&24120;&35265;&25925;&38556;&20195;&30721;&25551;&36848;,&33521;&25991;&25163;&20876;01