hp5225提示59F0错误
更新时间:2024/3/19 17:02:10,view:146hp5225打印机苏州越溪复印机维修服务中心电话0512-696l6769,苏州hp5225越溪维修站,hp5225越溪维修站,hp5225维修手册,hp5225驱动程序下载,hp5225说明书,hp5225故障代码在线技术交流,有问必答,hp5225卡纸,打印浅,亮红灯,不通电,无法使用等故障自己查询维修资料即可解决问题
The sensor flag/lever is stuck in the up position which causes the 59.F0 error
59.F0 error ITB Contact Alienation error
Code 59.F0
Display
59.F0 ERROR
Description Transfer alienation failure
Remedy
1. Verify that the ITB is installed.
2. Reconnect the primary-transfer disengagement sensor J19, and connector J128 on the DC controller PCA .
3. Run the sensor test in the sensor monitor mode to verify that the primary transfer disengagement sensor is functioning properly. If not, replace the primary transfer disengagement sensor.
4. Perform the alienation drive component test in the DIAGNOSTICS menu. If not, replace the fuser motor.
The following are the steps to be performed to solve 59.F0 error code.
Step 1: Reseat ITB
The first step is to reseat the Intermediate Transfer Belt (ITB).
Step 2: Check Connection of sensor SR9.
Next check the connection to sensor SR9. This sensor controls the Primary Transfer Roller Disengagement and is connected at the Connector J19. Also check the connections to the DC controller.
Step 3: Manually check the ITB gear and Flag.
hp5225提示59F0错误
热门图文