佳能2002g复印机报E014-0000错误代码
苏州维修电话696l6769,维修点查询,售后服务,售后,技术服务,客户服务,维修手册,用户手册
更新时间:2024/4/21 18:59:13,view:147佳能打印机2002g苏州佳能打印机售后维修服务中心电话0512-696l6769,苏州佳能维修点电话, 佳能Mp288换了车架出现E02, 佳能G2810显示E02代码, 佳能2530i打印淡, 佳能2900连续打印每张都要等一会, 佳能2420提示添加纸张,
Description After the fixing motor drive signal is generated, the clock signal does not arrive within1.3 sec
Causes The fixing motor (M19) is faulty. The DC controller PCB is faulty.
Remedy
1. Connector Is the connector of the fixing motor connected? NO: Connect the connector.
2. Main power supply PCB Is the drive voltage (24 V) of the fixing motor supplied by the main power supply PCB? Main power supply PCB: between J202-3 (24VU1-S) and J202-4 (OVU1) NO: Replace the main power supply PCB.
3. Fixing motor (M19), DC controller PCB Press the Start key. Is the lock signal of the fixing motor present at the connector (J312) on the DC controller PCB? Lock signal: J312-B4 (FSRM_LOCK*) the DC controller PCB change from 0 to about5 V? YES: Replace the fixing motor. NO: Replace the DC controller PCB.
热门图文