打印机老出现请求维修CA00是什么原因
更新时间：2024/4/23 13:25:27,view:257东芝CA00苏州东芝打印机售后维修服务中心电话0512-696l6769，苏州东芝维修点电话, 东芝300d硒鼓怎么清零, 东芝黄色传感器异常, 东芝4618A复印机打印重影, 东芝2809显示ca20, 东芝复印机出保养维护0008,
打印机老出现请求维修CA00是什么原因 
东芝2501c苏州售后维修服务电话696l6769 dsfdsasf 2018/9/18 16:07:48 东芝打印机老是出现请求维修 CA00 是什么意思
东芝2501c苏州售后维修服务电话696l6769 何爻妙 2018/9/19 21:55:22 [CA00] Color registration abnormality
Image formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
东芝2501c苏州售后维修服务电话696l6769 dsfdsasf 2018/9/18 16:07:48 东芝打印机老是出现请求维修 CA00 是什么意思 东芝2501c苏州售后维修服务电话696l6769 何爻妙 2018/9/19 21:55:22 [CA00] Color registration abnormalityImage formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
热门图文