爱普生R390打印机清零报错ErrorCode:20000011

http://www.oesell.com  来源:oesell.com  选稿:admin  文字大小:


爱普生 R390打印机清零报错 Error Code: 20000011

爱普生常见故障问题解答   2015-7-31 14:58:42 

    
爱普生R390售后技术论坛 蒋橇弁 2018/6/25 21:35:30 苏州爱普生维修站电话68852789
    该清零软件只适用于xp系统. 操作方法如下.

Faulty USB cables and/or sockets can also result in this error so if possible try a different USB cable and/or USB socket on your computer

If you are trying to run the utility on Vista or Windows 7 it often will not work. Usually you need to run the utility in compatibility mode as follows:
Download the Adjustment utility as you would normally and set your systems date/time as required by the instructions
Right click on the “Adjprog” and select “Properties“
Choose “compatibility” and select “windows xp“.
Find and select “Run as Administrator” (if you have this option)
Click OK at the bottom

1390打印机清零出现代码错误
爱普生常见故障问题解答   2015-7-31 22:52:51 


    
爱普生R390售后技术论坛 蒋橇弁 2018/6/25 21:35:30 苏州爱普生维修站电话68852789
    该清零软件只适用于xp系统. 操作方法如下.

Faulty USB cables and/or sockets can also result in this error so if possible try a different USB cable and/or USB socket on your computer

If you are trying to run the utility on Vista or Windows 7 it often will not work. Usually you need to run the utility in compatibility mode as follows:
Download the Adjustment utility as you would normally and set your systems date/time as required by the instructions
Right click on the “Adjprog” and select “Properties“
Choose “compatibility” and select “windows xp“.
Find and select “Run as Administrator” (if you have this option)
Click OK at the bottom

固件刷机出现错误了。
爱普生R390售后技术论坛 蒋橇弁 2018/6/25 21:35:30 苏州爱普生维修站电话68852789


    该清零软件只适用于xp系统. 操作方法如下.

Faulty USB cables and/or sockets can also result in this error so if possible try a different USB cable and/or USB socket on your computer

If you are trying to run the utility on Vista or Windows 7 it often will not work. Usually you need to run the utility in compatibility mode as follows:
Download the Adjustment utility as you would normally and set your systems date/time as required by the instructions
Right click on the “Adjprog” and select “Properties“
Choose “compatibility” and select “windows xp“.
Find and select “Run as Administrator” (if you have this option)
Click OK at the bottom

苏州爱普生售后维修站电话:0512-68852789,


网友相关回复如下:(以下网友回复只代表网友个人观点,不代表苏州办公设备网观点)

验证码:
昵称: 匿名
内容:
      

售后技术解答   2015-7-31 22:52:51 

    
爱普生R390售后技术论坛 蒋橇弁 2018/6/25 21:35:30 苏州爱普生维修站电话68852789
    该清零软件只适用于xp系统. 操作方法如下.

Faulty USB cables and/or sockets can also result in this error so if possible try a different USB cable and/or USB socket on your computer

If you are trying to run the utility on Vista or Windows 7 it often will not work. Usually you need to run the utility in compatibility mode as follows:
Download the Adjustment utility as you would normally and set your systems date/time as required by the instructions
Right click on the “Adjprog” and select “Properties“
Choose “compatibility” and select “windows xp“.
Find and select “Run as Administrator” (if you have this option)
Click OK at the bottom

固件刷机出现错误了。

售后技术解答   2015-7-31 14:58:42 

    
爱普生R390售后技术论坛 蒋橇弁 2018/6/25 21:35:30 苏州爱普生维修站电话68852789
    该清零软件只适用于xp系统. 操作方法如下.

Faulty USB cables and/or sockets can also result in this error so if possible try a different USB cable and/or USB socket on your computer

If you are trying to run the utility on Vista or Windows 7 it often will not work. Usually you need to run the utility in compatibility mode as follows:
Download the Adjustment utility as you would normally and set your systems date/time as required by the instructions
Right click on the “Adjprog” and select “Properties“
Choose “compatibility” and select “windows xp“.
Find and select “Run as Administrator” (if you have this option)
Click OK at the bottom

1390打印机清零出现代码错误

热门图文

HP5000 鼓加粉后,纸张变得很脏
hp1020 打印黑点非常多,问题原
HP 100/120/130/500
HP 1010/1012/1020,
epson7600/9600液晶屏报

相关技术资料链接(20条)











最新技术资料
推荐技术资料
网友热门关注
· 施乐(Xerox)复印机常见问题故障30例
· HP1020连电脑,电脑提示无法识别USB设备,安装驱动时检测不到打印机新硬件.
· 佳能ix4000出现错误代码5C00,是什么故障?
· 爱普生R230 打印机常见故障及解决方法
· 京瓷fs1020mfp显示注意和复印灯一直亮,是什么原因
· 兄弟7340开机就提示扫描错误AF,故障排除
· 三星SCX-4623一体激光打印机,开机后液晶屏显示“错误 #02-000,关闭然后再打开”,不能打印。关机重启依旧,系统和驱动重装也不行。
· 松下1515p 出现红色扳手和纸盒解决方法
· 佳能mp259 提示错误代码p07,故障排除
· 兄弟传真机 传真收发出现通讯错误,处理方法
· 施乐CP105B开机会自检,自检一会儿后,错误灯闪,用施乐的软件查看打印机状态,提示:“打印机错误:092-651-0X02110000。”
· 施乐cp105b 报错代码042-372、092-651等故障解决办法
· 佳能MP259 故障代码:错误5B00,机面出P07,是什么故障?
· 佳能4452 开机显示打开主电源故障,维修案例
· 联想M1840加粉后怎么清零
· 东芝2006提示代码C452——如何清代码?
· 惠普3508 提示cartridge error,亮着红色感叹号的灯,问题原因
· 夏普1808S显示屏上面的三角形灯闪烁且机器不停的转动,无法复印请问怎样处理?
· 三星4824一体机,报系统错误,请重启,故障解决一例
· LENOVOm7450f提示硒鼓错误,将硒鼓单元蓝色滑块来回滑动几下
· HP5000 鼓加粉后,纸张变得很脏,问题原因?
· 惠普1216打印机扫描出现videoInitializeError提示,应该怎样解决
· 佳能MP236,支持代码1300,说是堵纸,要按启动按键,出了白纸,就是不打印,是怎么回事啊??
· HP1136开机面板叹号灯闪,提示52.0扫描仪错误,求指导。不能打印
· 京瓷FS1110,加完粉后墨粉和注意灯一直亮着不打印这个怎么解决
· kyocera fs-1040 gx打印一直显示红灯,是什么原因
· 兄弟DCP1518打印机,换完粉后老是显示更换墨粉,怎么清零啊
· 基士得耶6200C 显示E-06代码,故障解决方法
· 映美FP-530K+ 常见故障问题在线解答
· 理光JP785C 出代码E-06,问题原因分析
· 施乐M105B M205B 拆机后无电,拆了硒鼓后,开机没有没反应,没电了
· 施乐m205b墨粉已经全部用尽,打印机提示更换墨粉盒或者是确认墨粉筒安装是否正确?
· 三星CLP-315严重卡纸,求解决办法!
· 四通OKI 5560S一开机电源灯亮一下就关机,然后按开关键打开打印机都开不起来不通电,如果把电源线拔掉后,过段时间后,在插上去,也是开一下电源指示灯亮一下后,又自动关机打不开?
· 兄弟250c 出现无法打印50是什么意思?
· 佳能8050 如何校准了?
· 富士施乐CM205F提示092-651,代码:2880000,如何维修呀
· 三星3401打印机出现故障一开机不预热,状态灯亮红灯,是什么故障
· 夏普AR-3818S打印机,出现H与5交替闪烁,要怎么处理,详细一点
· 京瓷打印机FS-1020MFP显示注意E-1是什么毛病
· epson T50打印机老出现常规错误,墨水灯和进纸灯同时闪,不能打印测试页?
· 三星3401fh出现#u1-2320,是什么情况
· 东芝2006复印机显示维护
· 解除惠普5200激光打印机芯片的方法
· HP1000 打印机常见故障列表
· 兄弟7360打印机,左边打印很浅,右边正常是怎么回事呢?
· 佳能4300 开机不动作 交替闪10下黄绿灯,故障原因
· 松下228 每次打印或复印时经常卡纸,问题原因分析
· 三星4321NS一体机,开机正常,复印出来是白纸后报错#U2-1113
· 东芝2307请求维修C415怎么清除
· 东芝2006报错代码c412怎么回事
· 施乐M105b清废粉的拆机图
· brotherMFC-1818打印机加过碳粉之后,提示还是要:更换碳粉
· 东芝2006显示维护是怎么回事
· 三星3401状态亮红灯,不打印
· 施乐M215b提示更换墨粉筒,如何处理
· 佳能MX368提示U150请检查黑色,彩色。怎么办?我改的连供
· HP1536提示49serviceerror
· 佳能IP4880的提示COOO错误是不是主板的问题啊!交替闪灯21下
· 三星scx-3201g打印时提示u1-2113错误状态灯红灯常亮
· 富士施乐m158f粉盒已换但还是提示更换,如何解决
· 理光SP100SF打印机出现维修呼叫SC542了,怎么办
· HP T770绘图仪 三个打印头的墨水总被打空,怎么办?
· 施乐DC2060 打印图像不实,图像漏白,故障维修一例
· sharp打印机AR2008D数字显示框出现5和H闪烁
· 联想LJ3900DN指示灯都代表什么
· 兄弟7060D的一体机开机就提示无法扫描AF打印正常这是那点的问题啊
· 兄弟7360老是显示硒鼓错误
· 东芝2006报错代码c414怎么回事
· 施乐158B报错误代码4000000,是什么问题
· hp3055打印机报scannererror3错误是什么问题
· 理光C2010激光彩色复印机老是提示SC400错误代码,调了一下又出现SC303代码,搞不懂怎么回事
· 科密b3210验钞机出现f24是咋回事
· 三星1641 开机之后两个灯闪一下就没反应了。电脑也不认打印机了。怎么解决?
· 爱普生L201三灯亮,不能打印请问如何解决
· 三星4521一体机,开机面板不显示,喇叭嘟嘟响几下?不工作
· 三星打印机SCX-4321NS拆解图解
· 夏普AR1808S打印机出现F和2交替跳如何清除
· 富士施乐C525A怎么开机一直调整显示:pleasewait,机器不运转是怎么回事
· 三星3401FH硒鼓加过粉出现不兼容墨粉盒
· 东芝2006复印机显示“维护”2013年11月买的
· 理光sp200打印机红灯亮是什么毛病
· 松下打印机kxmb2003cn卡纸怎么办
· sharp3108N错误代码F2-64问题
· 爱普生扫描仪1270原来使用正常,最后使用时成为开机绿灯闪完后一会变成红灯闪,或者是开机后绿灯闪完打开软件就会红灯闪。不连接电脑一直是绿灯。请问这是什么问题
· 东芝2051提示CE40代码是什么原因
· 佳能ix4000 不开机主板烧, 哪个芯片烧的比较多
· 柯美283复印机出现代码c-3823故障
· KYOCERA1020总出现E-1错误怎么回事FS-1020MFP
· 映美620K开机后进退纸灯和换行灯同时闪烁,是什么故障?
· sharpAR4818s一体机复印出来的一半颜色深一半颜色浅如何设置
· 美能达184复印件,开机后出现维修召唤(C6101)怎么处理,谢谢!
· 京瓷1040打印机开机时注意红灯闪
· hp6500提示硬件错误0x61011be9/0x6100000e
· 兄弟MFC-J220无法清洗35是怎么回事
· canon2520i的激光器怎么拆卸啊
· hp2025打印机提示cleaningmisprintpressok
· 三星4521一体机,通电之后,自动有断电,之后又通电,又重启
· HP1020打印机开机不停的响是什么原因