富士施乐打印机C2255已异常结束016-799
更新时间：2024/4/23 10:04:57,view:3770施乐C2255苏州施乐打印机售后维修服务中心电话0512-696l6769，苏州施乐维修点电话, 施乐2520恢复出厂设置, 施乐2110开机空转, fujixerox打印机062360故障, 富士施乐C2060报错116-321, 施乐s2110睡眠怎么关,
富士施乐 打印机C2255已异常结束016-799
施乐常见故障问题解答 小蓝猫 2015-7-21 6:48:44
打印机显示“已异常结束，016-799”，内存清零依然不行，咋整？
施乐常见故障问题解答 2015-7-21 7:35:07
The Resolution
Various Xerox printer manuals say the following about error 016-799:
The print data contains invalid parameters. Check the print data and print options and try printing again.
The problem often seems to lie with paper sizes. Many users have reported that if the paper size is set to “custom” within the application they’re attempting to print from the printer may produce this error.
Some users have mentioned that the physical paper guides in the paper tray can cause the error if they’re not correctly lined up against the paper.
As such, the following troubleshooting steps are recommended. Perform each step in turn, checking after each one whether the problem has been solved.
•Open the printer paper tray(s) and ensure all physical paper guides are lined up correctly against the paper.
•Ensure the paper size is explicitly defined within the application you wish to print from; do not set it to “custom” or “automatic”.
•Ensure the paper source setting is correct in the printer properties. For example, if the paper is located in tray 2, the paper source should be tray 2.
•Check all other printer settings. It may be that something has been accidentally set when it shouldn’t be.
•Re-install the print driver
•Consider replacing the print driver with the Xerox Global Print Driver (PCL 6)
施乐常见故障问题解答 2015-9-3 8:17:23
纸张过厚
施乐常见故障问题解答 小蓝猫 2015-7-21 6:48:44 打印机显示“已异常结束，016-799”，内存清零依然不行，咋整？
施乐常见故障问题解答 2015-7-21 7:35:07 The Resolution
Various Xerox printer manuals say the following about error 016-799:
The print data contains invalid parameters. Check the print data and print options and try printing again.
The problem often seems to lie with paper sizes. Many users have reported that if the paper size is set to “custom” within the application they’re attempting to print from the printer may produce this error.
Some users have mentioned that the physical paper guides in the paper tray can cause the error if they’re not correctly lined up against the paper.
As such, the following troubleshooting steps are recommended. Perform each step in turn, checking after each one whether the problem has been solved.
•Open the printer paper tray(s) and ensure all physical paper guides are lined up correctly against the paper.
•Ensure the paper size is explicitly defined within the application you wish to print from; do not set it to “custom” or “automatic”.
•Ensure the paper source setting is correct in the printer properties. For example, if the paper is located in tray 2, the paper source should be tray 2.
•Check all other printer settings. It may be that something has been accidentally set when it shouldn’t be.
•Re-install the print driver
•Consider replacing the print driver with the Xerox Global Print Driver (PCL 6)
施乐常见故障问题解答 2015-9-3 8:17:23 纸张过厚
热门图文