京瓷FS-1128MFP 提示代码:C7990是什么问题呢?
更新时间:2024/3/31 11:46:31,view:3067京瓷打印机苏州京瓷阳澄湖打印机维修服务中心电话0512-696l6769,苏州京瓷阳澄湖维修站,京瓷阳澄湖维修站,京瓷维修手册,京瓷驱动程序下载,京瓷说明书,京瓷故障代码在线技术交流,有问必答,京瓷卡纸,打印浅,亮红灯,不通电,无法使用等故障自己查询维修资料即可解决问题
京瓷常见故障问题解答 2012-7-15 21:15:08
C7990 废粉满了, 解决方案如下:
follw these steps, it should work
turn off copier.
open top toner cover.
turn copier back on.
when you see message "close top cover" press "system menu" button.
scroll up to "service setting" then press the # button, green "start" button and the "enter" button all at the same time.
then scroll down to "maint mode"
press "enter"
then enter 163
press" enter "
turn off copier then turn back on
close toner cover
京瓷常见故障问题解答 2012-7-15 21:16:45
C7990 废粉满了, 解决方案如下:
follw these steps, it should work
turn off copier.
open top toner cover.
turn copier back on.
when you see message "close top cover" press "system menu" button.
scroll up to "service setting" then press the # button, green "start" button and the "enter" button all at the same time.
then scroll down to "maint mode"
press "enter"
then enter 163
press" enter "
turn off copier then turn back on
close toner cover
京瓷常见故障问题解答 2013-5-20 9:58:10
能不能看到中文的
京瓷常见故障问题解答 心静自然凉 2013-10-23 20:26:33
京瓷FS1124出现C7990
京瓷常见故障问题解答 W6GNTWYC 2013-10-23 21:56:47
废粉盒已满,清理实施
售后技术解答 W6GNTWYC 2013-10-23 21:56:47
废粉盒已满,清理实施
售后技术解答 心静自然凉 2013-10-23 20:26:33
京瓷FS1124出现C7990
售后技术解答 2013-5-20 9:58:10
能不能看到中文的
售后技术解答 2012-7-15 21:16:45
C7990 废粉满了, 解决方案如下:
follw these steps, it should work
turn off copier.
open top toner cover.
turn copier back on.
when you see message "close top cover" press "system menu" button.
scroll up to "service setting" then press the # button, green "start" button and the "enter" button all at the same time.
then scroll down to "maint mode"
press "enter"
then enter 163
press" enter "
turn off copier then turn back on
close toner cover
售后技术解答 2012-7-15 21:15:08
C7990 废粉满了, 解决方案如下:
follw these steps, it should work
turn off copier.
open top toner cover.
turn copier back on.
when you see message "close top cover" press "system menu" button.
scroll up to "service setting" then press the # button, green "start" button and the "enter" button all at the same time.
then scroll down to "maint mode"
press "enter"
then enter 163
press" enter "
turn off copier then turn back on
close toner cover
热门图文