hp 4550 Paper Jam 13.5 error
更新时间:2024/3/11 23:59:42,view:106hpHP 4550 Paper Jam 13.5 error打印机苏州hp一体机售后服务中心电话0512-696l6769,苏州hp维修站,hp苏州维修站,hp一体机维修站,在线技术交流,有问必答,小故障自己查询维修资料即可解决问题
All rollers look well kept, not worn. No shine/haze or hardness to the rollers. I print my first few pages and notice repetitive marks on the prints, totally different story as the drum only has 4% left on the drum. I figure I got burned as the company said "no problems with the printer, no problems with the consumables. Part lie part truth. Everything other than the drum appears good enough.
So I get to powering it up after cleaning up the toner dust everywhere... I wonder if it was shipped to them with the toners installed. Anyhow the printer powers up fine. I notice the repitition on the print, the drum has etchings so I figure it's time to buy a drum.
Now for the paper jam delemma. The paper tray roller picks up the paper, feeds it to just under the transfer belt and it appears at this point that the printer jams. I am using quality laser paper, and I am up to the challenge to get this printer to work as I have heard good things about it on the site.
If anyone has ideas on what to look at, replace etc... I'd appreciate it. I looked at the roller that sits on the underside of the chrome roller in the middle tray and it moves freely. The transfer belt does move without any major struggle so I don't think it's a binding issue there. That's as far as it gets so I'm puzzled where to look for the 13.5 jam repair.
hp常见故障问题解答 2011-3-13 16:18:12
Well my bad on the 13.5 jam. There was paper in just as it's going down a ribbed belt just past the transfer roller.
The printer keeps jamming right at the entrance of the fuser. The paper is just sitting loosely and the toner isn't fused.
The appearance of the paper is just blue and black on the paper doing a configuration printout. The paper at the top appears to be missing part of the page. When I look at the backside it appears to have the other print to it, so I don't know if the paper folds are occuring as it tries to fuse or there is something else happening to the paper. Based on the "hard" z style paper fold when I pulled it out it appears that something is causing the paper to get bent then it tries to continue to add color to the paper but then it starts getting on the other side and I do not have a duplexer.
It printed a good 5 pages without a hitch but now it can't print a page for its life.
Thanks for anyone who has seen this and can give me some tips.
苏州hp 2011-3-13 16:18:12
Well my bad on the 13.5 jam. There was paper in just as it's going down a ribbed belt just past the transfer roller.
The printer keeps jamming right at the entrance of the fuser. The paper is just sitting loosely and the toner isn't fused.
The appearance of the paper is just blue and black on the paper doing a configuration printout. The paper at the top appears to be missing part of the page. When I look at the backside it appears to have the other print to it, so I don't know if the paper folds are occuring as it tries to fuse or there is something else happening to the paper. Based on the "hard" z style paper fold when I pulled it out it appears that something is causing the paper to get bent then it tries to continue to add color to the paper but then it starts getting on the other side and I do not have a duplexer.
It printed a good 5 pages without a hitch but now it can't print a page for its life.
Thanks for anyone who has seen this and can give me some tips.
热门图文