hp 3800 HALFTONE CALIBRATION ERROR
更新时间：2024/4/16 5:39:40,view:794hp打印机HP 3800 HALFTONE CALIBRATION ERROR苏州hp打印机售后维修服务中心电话0512-696l6769，苏州维修点电话, hp5200lx无法读取碳粉盒数据, hp7110怎么测试, HP-C4129X, HP5200高压板在哪, hp277打印纸张通路卡纸,
hp CLJ 3800 that keeps showing a 54.oc.00/01/02/03 halftone calibration error.
Does anybody else have any ideas?
hp常见故障问题解答 2010-4-24 9:58:29
I also get that message and a lot of other ones as well. I usually just lift the cover and lift the highlighted tank out and put it back in, sometimes I have to do that 2 or 3 times before it will let me print. If lifting that tank doesn't do it, try lifting all the tanks and putting them back. Eventually you will get a message that the tank you are refilling is empty (even if it's full). When that happens, press and hold the "stop/reset" button for 5 seconds,(this is from Canon) then you will get a message that Canon will not be responsible for damage to the printer because you are using different ink than theirs. (big deal! as long as it prints).
I have learned to hate Canon printers because of this aggravation.
I am still hoping someone will post the reset codes for these tanks.
Good luck.
Does anybody else have any ideas?
hp常见故障问题解答 2010-4-24 9:58:29 I also get that message and a lot of other ones as well. I usually just lift the cover and lift the highlighted tank out and put it back in, sometimes I have to do that 2 or 3 times before it will let me print. If lifting that tank doesn't do it, try lifting all the tanks and putting them back. Eventually you will get a message that the tank you are refilling is empty (even if it's full). When that happens, press and hold the "stop/reset" button for 5 seconds,(this is from Canon) then you will get a message that Canon will not be responsible for damage to the printer because you are using different ink than theirs. (big deal! as long as it prints).
I have learned to hate Canon printers because of this aggravation.
I am still hoping someone will post the reset codes for these tanks.
Good luck.
苏州hp售后维修站 互动 2010-4-24 9:58:29 I also get that message and a lot of other ones as well. I usually just lift the cover and lift the highlighted tank out and put it back in, sometimes I have to do that 2 or 3 times before it will let me print. If lifting that tank doesn't do it, try lifting all the tanks and putting them back. Eventually you will get a message that the tank you are refilling is empty (even if it's full). When that happens, press and hold the "stop/reset" button for 5 seconds,(this is from Canon) then you will get a message that Canon will not be responsible for damage to the printer because you are using different ink than theirs. (big deal! as long as it prints).
I have learned to hate Canon printers because of this aggravation.
I am still hoping someone will post the reset codes for these tanks.
Good luck.
热门图文