Oki 320 Turbo (Rev.E) weird problem

http://www.oesell.com  来源:oesell.com  选稿:admin  文字大小:


have a rev.E Oki 320 Turbo which will print around 2 pages then stops with alarm light on ONLY when the top cover is in place....
remove the cover and all is fine.

I cannot see any rhyme or reason for this fault.... nothing seems to be jamming, the lid does not mechanically interfere with the head or tractor... Printer is around 2yr old with light-moderate use (2-3 page/day, most days..)

Any ideas???


oki常见故障问题解答 D.BUSH  2009-7-3 23:42:03 

    The light pattern you describe normally means that there is a spacing error, the carriage's ability to move from side to side. The repair parts order is to replace the spacing motor, then the printhead cable, then the control/power supply board. Before going through all that you may want to check that the carriage is clean, lubricated and not binding. also check the black track under the carriage to make sure that it is clean and ok. Hope this helps.


oki常见故障问题解答 D.BUSH  2009-7-3 23:42:03 

    The light pattern you describe normally means that there is a spacing error, the carriage's ability to move from side to side. The repair parts order is to replace the spacing motor, then the printhead cable, then the control/power supply board. Before going through all that you may want to check that the carriage is clean, lubricated and not binding. also check the black track under the carriage to make sure that it is clean and ok. Hope this helps.